+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €1.70 per piece.
629-2Z · 9 × 26 × 8

Deep groove ball · 629-2Z

radial — mediumaxial — low, on both sides
    Drawing of 629-2Z: ⌀9 × ⌀26 × 8 mm629-2Z2Z
    Fig. 1: 629-2Z, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm
    Bearing SKF 629-2Z — photo 1
    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 629-2Z

    €2.06per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    d
    9 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    26 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    8 mm
    Width BRing width. Source: two supplier sources
    Seal
    2Zmetal shields on both sides
    Clearance
    normal clearance
    C
    4.75 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
    C0
    1.96 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.021 kg
    MassWeight of the product. Source: supplier data
    01

    Often bought with this

    shaft snap ring Ø9, bore snap ring Ø26

    2 products
    • Shaft snap ring Ø9CT SEG 9 Z by1000Why it fits: DIN 471 snap ring for a 9 shaft: holds the inner ring on the shaft
      €5.84out of stock
    • Bore snap ring Ø26CT SEG 26 W by 1000Why it fits: DIN 472 snap ring for a 26 bore: holds the outer ring in the housing
      €22.64available to order
    02

    Details

    what this bearing is, questions

    About the bearing

    D 26d 9B 8
    d×D×Bsize 9 × 26 × 8mm
    Cdynamic 4.75kN
    C0static 1.96kN
    mweight 0.021kg

    Deep groove ball bearing 629-ZZ, design 2Z: metal shields on both sides.

    C, C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet