+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €1.74 per piece.
627-2Z · 7 × 22 × 7

Deep groove ball · 627-2Z

radial — mediumaxial — low, on both sides
    Drawing of 627-2Z: ⌀7 × ⌀22 × 7 mm627-2Z2Z
    Fig. 1: 627-2Z, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 627-2Z

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 627-2Z

    €2.11per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    d
    7 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    22 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    7 mm
    Width BRing width. Source: two supplier sources
    Seal
    2Zmetal shields on both sides
    Clearance
    normal clearance
    C
    3.45 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
    C0
    1.37 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
    m
    0.013 kg
    MassWeight of the product. Source: supplier data
    01

    Often bought with this

    shaft snap ring Ø7, bore snap ring Ø22, seal 7×22

    3 products
    • Shaft snap ring Ø7CT SEG 7 Z by1000Why it fits: DIN 471 snap ring for a 7 shaft: holds the inner ring on the shaft
      €5.63out of stock
    • Bore snap ring Ø22CT SEG 22 W by 1000Why it fits: DIN 472 snap ring for a 22 bore: holds the outer ring in the housing
      €15.65out of stock
    • Seal 7×22JULU 007-22-7 TCWhy it fits: Oil seal 7×22: shaft 7 and housing bore 22, the same as the bearing; the bearing has its own seals (2Z), and the oil seal closes the unit from outside
      €0.17150 pcs
    02

    Details

    what this bearing is, questions

    About the bearing

    D 22d 7B 7
    d×D×Bsize 7 × 22 × 7mm
    Cdynamic 3.45kN
    C0static 1.37kN
    mweight 0.013kg

    Deep groove ball bearing 627-ZZ, design 2Z: metal shields on both sides.

    C, C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet