+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6226 · 130 × 230 × 40

Deep groove ball · 6226

radial — mediumaxial — low, on both sides
    Drawing of 6226: ⌀130 × ⌀230 × 40 mm6226
    Fig. 1: 6226, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6226

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6226

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    4 exact, 7 approximate
    d
    130 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    230 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    40 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    156 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 130 × 230 × 40 from other brands

    11 products
    Series illustration (not a photo of this item): 6226
    You are viewingSKF 6226

    Everything the number specifies matches: series 62, 130 × 230 × 40 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 62266226This bearingSKF130 × 230 × 40available to orderon requestyou are here
    • Series illustration (not a photo of this item): 62266226CT130 × 230 × 40available to orderon request
    • Series illustration (not a photo of this item): 62266226DYZV130 × 230 × 40available to orderon request
    • Series illustration (not a photo of this item): 62266226KG130 × 230 × 40available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    D 230d 130B 40
    d×D×Bsize 130 × 230 × 40mm
    Cdynamic 156kN

    Deep groove ball bearing 6226. Under GOST the same bearing is designated 226.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 226?

    It is the same bearing under GOST 3189-89: 226 corresponds to the ISO base 6226. Size 130 × 230 × 40 mm, a full equivalent of 6226.

    Will 6226 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet