+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6222-2Z · 110 × 200 × 38

Deep groove ball · 6222-2Z

radial — mediumaxial — low, on both sides
    Drawing of 6222-2Z: ⌀110 × ⌀200 × 38 mm6222-2Z2Z
    Fig. 1: 6222-2Z, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6222-2Z

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6222-2Z

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 16 approximate
    d
    110 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    200 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    38 mm
    Width BRing width. Source: supplier data
    Seal
    2Zmetal shields on both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 110 × 200 × 38 from other brands

    17 products
    Series illustration (not a photo of this item): 6222-2Z
    You are viewingSKF 6222-2Z

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 62226222open, no protectionCT110 × 200 × 38283 pcs€22.31
    • Series illustration (not a photo of this item): 62226222open, no protectionNTE110 × 200 × 3820 pcs€29.29
    • Series illustration (not a photo of this item): 62226222open, no protectionDYZV110 × 200 × 38available to orderon request
    • Drawing: 6222 M6222 Mopen, no protection, MFAG110 × 200 × 38available to orderon request
    • Drawing: 6222 M C36222 M C3open, no protection, clearance C3, MFAG110 × 200 × 38available to orderon request
    • Drawing: 6222 M C46222 M C4open, no protection, clearance C4, MFAG110 × 200 × 38available to orderon request
    • Drawing: 6222-MA-S1-C46222-MA-S1-C4open, no protection, clearance C4, MA, S1FAG110 × 200 × 38available to orderon request
    • Series illustration (not a photo of this item): 62226222open, no protectionKG110 × 200 × 38available to orderon request
    • Series illustration (not a photo of this item): 62226222open, no protectionSKF110 × 200 × 38available to orderon request
    • Series illustration (not a photo of this item): 6222 2RS6222 2RScontact seals on both sidesCT110 × 200 × 3846 pcs€18.86
    02

    Details

    what this bearing is, questions

    About the bearing

    D 200d 110B 38
    d×D×Bsize 110 × 200 × 38mm

    Deep groove ball bearing 6222-ZZ, design 2Z: metal shields on both sides. Under GOST the same bearing is designated 80222.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 80222?

    It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0222 corresponds to the ISO base 6222. Size 110 × 200 × 38 mm, a full equivalent of 6222-ZZ.

    Will 6222 2Z C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet