+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
62209-2RS · 45 × 85 × 23

Deep groove ball · 62209 2RS

radial — mediumaxial — low, on both sides
    Drawing of 62209 2RS: ⌀45 × ⌀85 × 23 mm62209 2RS2RS
    Fig. 1: 62209 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 62209-2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 62209-2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    4 exact, 3 approximate
    d
    45 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    85 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    23 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    m
    0.48 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 45 × 85 × 23 from other brands

    7 products
    Series illustration (not a photo of this item): 62209 2RS
    You are viewingSKF 62209-2RS

    Everything the number specifies matches: series 622, 45 × 85 × 23 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 62209 2RS62209 2RSThis bearingSKF45 × 85 × 23out of stockon requestyou are here
    • Series illustration (not a photo of this item): 62209 2RS62209 2RSCT45 × 85 × 231 pcs€3.22
    • Photo: 62209 2RS62209 2RSZ&S45 × 85 × 23available to order€6.39
    • Series illustration (not a photo of this item): 62209 2RS62209 2RSNTE45 × 85 × 23available to orderon request
    02

    Often bought with this

    shaft snap ring Ø45, bore snap ring Ø85, seal 45×85

    4 products
    • Shaft snap ring Ø45CT SEG 45 Z by 1000Why it fits: DIN 471 snap ring for a 45 shaft: holds the inner ring on the shaft
      €77.63available to order
    • Bore snap ring Ø85CT SEG 85 W by 100Why it fits: DIN 472 snap ring for a 85 bore: holds the outer ring in the housing
      €22.57out of stock
    • Seal 45×85JULU 045-85-10 TCWhy it fits: Oil seal 45×85: shaft 45 and housing bore 85, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.62690 pcs
    • Seal 45×85SOG Oil seal 45x85x10Why it fits: Oil seal 45×85: shaft 45 and housing bore 85, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 85d 45B 23
    d×D×Bsize 45 × 85 × 23mm
    mweight 0.48kg

    Deep groove ball bearing 62209-2RS, design 2RS: contact seals on both sides.

    M: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet