+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
62207-2RS1 · 35 × 72 × 23

Deep groove ball · 62207-2RS1

radial — mediumaxial — low, on both sides
    Drawing of 62207-2RS1: ⌀35 × ⌀72 × 23 mm62207-2RS12RS1
    Fig. 1: 62207-2RS1, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 62207-2RS1

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 62207-2RS1

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    6 exact, 7 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    72 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    23 mm
    Width BRing width. Source: supplier data
    Seal
    2RS1contact seals on both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 35 × 72 × 23 from other brands

    14 products
    Series illustration (not a photo of this item): 62207-2RS1
    You are viewingSKF 62207-2RS1

    Everything the number specifies matches: series 622, 35 × 72 × 23 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 62207-2RS162207-2RS1This bearingSKF35 × 72 × 23available to orderon requestyou are here
    • Series illustration (not a photo of this item): 62207 2RS62207 2RSCT35 × 72 × 231,034 pcs€2.40
    • Series illustration (not a photo of this item): 62207 2RS62207 2RSNTE35 × 72 × 2336 pcs€3.94
    • Photo: 62207 2RS62207 2RSZ&S35 × 72 × 23available to order€4.72
    • Series illustration (not a photo of this item): 62207 2RS62207 2RSno brand35 × 72 × 23available to orderon request
    • Series illustration (not a photo of this item): 62207 2RS62207 2RSKG35 × 72 × 23available to orderon request
    02

    Often bought with this

    shaft snap ring Ø35, bore snap ring Ø72, seal 35×72

    6 products
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø72CT SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      €177.06available to order
    • Bore snap ring Ø72SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 35×72JULU 035-72-12 TCWhy it fits: Oil seal 35×72: shaft 35 and housing bore 72, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.4650 pcs
    • Seal 35×72JULU 035-72-10 TCWhy it fits: Oil seal 35×72: shaft 35 and housing bore 72, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.502,454 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 72d 35B 23
    d×D×Bsize 35 × 72 × 23mm

    Deep groove ball bearing 62207-2RS, design 2RS1: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Will 62207 2RS1 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet