+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
62205-2RS1/C3 · 25 × 52 × 18

Deep groove ball · 62205-2RS1/C3

radial — mediumaxial — low, on both sides
    Drawing of 62205-2RS1/C3: ⌀25 × ⌀52 × 18 mm62205-2RS1/C32RS1
    Fig. 1: 62205-2RS1/C3, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 62205-2RS1/C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 62205-2RS1/C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 21 approximate
    d
    25 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    52 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    18 mm
    Width BRing width. Source: supplier data
    Seal
    2RS1contact seals on both sides
    Clearance
    C3
    C
    14 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 25 × 52 × 18 from other brands

    22 products
    Series illustration (not a photo of this item): 62205-2RS1/C3
    You are viewingSKF 62205-2RS1/C3

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 62205 2RS62205 2RSnormal clearanceCT25 × 52 × 182,037 pcs€1.44
    • Series illustration (not a photo of this item): 62205 2RS62205 2RSnormal clearanceNTE25 × 52 × 1890 pcs€1.71
    • Cross-section drawing to size: Deep groove ball, 25 × 52 × 18 mm4205 2RSnormal clearanceCT25 × 52 × 18338 pcs€2.43
    • Photo: 4205 2RS4205 2RSnormal clearanceWBW25 × 52 × 18available to order€5.45
    • Photo: 62205-2RS162205-2RS1normal clearanceSKF25 × 52 × 18available to order€14.36
    • Cross-section drawing to size: Deep groove ball, 25 × 52 × 18 mm4205 2RSnormal clearanceno brand25 × 52 × 18available to orderon request
    • Series illustration (not a photo of this item): 62205 2RS62205 2RSnormal clearanceno brand25 × 52 × 18available to orderon request
    • Series illustration (not a photo of this item): 62205 2RS62205 2RSnormal clearanceKG25 × 52 × 18available to orderon request
    • Series illustration (not a photo of this item): 62205 2RS62205 2RSnormal clearanceSKF25 × 52 × 18out of stockon request
    • Photo: 4205 2RS4205 2RSnormal clearanceZ&S25 × 52 × 18out of stockon request
    02

    Often bought with this

    shaft snap ring Ø25, bore snap ring Ø52, seal 25×52

    6 products
    • Shaft snap ring Ø25CT SEG 25 Z by 1000Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      €31.6125 pcs
    • Shaft snap ring Ø25SEG 25 Z (100 pcs)Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø52CT SEG 52 W by 1000Why it fits: DIN 472 snap ring for a 52 bore: holds the outer ring in the housing
      €86.47available to order
    • Bore snap ring Ø52CT-RING SEG 52 W (100 pcs)Why it fits: DIN 472 snap ring for a 52 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 25×52JULU 025-52-10 TCWhy it fits: Oil seal 25×52: shaft 25 and housing bore 52, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.392,950 pcs
    • Seal 25×52JULU 025-52-7 TCWhy it fits: Oil seal 25×52: shaft 25 and housing bore 52, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.397,720 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 52d 25B 18
    d×D×Bsize 25 × 52 × 18mm
    Cdynamic 14kN

    Deep groove ball bearing 62205-2RS C3, design 2RS1: contact seals on both sides.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet