+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6218-2Z · 90 × 160 × 30

Deep groove ball · 6218-2Z

radial — mediumaxial — low, on both sides
    Drawing of 6218-2Z: ⌀90 × ⌀160 × 30 mm6218-2Z2Z
    Fig. 1: 6218-2Z, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6218-2Z

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6218-2Z

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    5 exact, 29 approximate
    d
    90 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    160 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    30 mm
    Width BRing width. Source: supplier data
    Seal
    2Zmetal shields on both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 90 × 160 × 30 from other brands

    35 products
    Series illustration (not a photo of this item): 6218-2Z
    You are viewingSKF 6218-2Z

    Everything the number specifies matches: series 62, 90 × 160 × 30 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 6218-2Z6218-2ZThis bearingSKF90 × 160 × 30available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6218 ZZ6218 ZZCT90 × 160 × 3050 pcs€9.37
    • Photo: 6218 ZZ6218 ZZZ&S90 × 160 × 30available to order€23.34
    • Series illustration (not a photo of this item): 6218 ZZ6218 ZZKG90 × 160 × 30available to orderon request
    • Series illustration (not a photo of this item): 6218 ZZ6218 ZZNTE90 × 160 × 30available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    D 160d 90B 30
    d×D×Bsize 90 × 160 × 30mm

    Deep groove ball bearing 6218-ZZ, design 2Z: metal shields on both sides. Under GOST the same bearing is designated 80218.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 80218?

    It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0218 corresponds to the ISO base 6218. Size 90 × 160 × 30 mm, a full equivalent of 6218-ZZ.

    Will 6218 2Z C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet