+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6217/C3 · 85 × 150 × 28

Deep groove ball · 6217/C3

radial — mediumaxial — low, on both sides
    Drawing of 6217/C3: ⌀85 × ⌀150 × 28 mm6217/C3
    Fig. 1: 6217/C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6217/C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6217/C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 30 approximate
    d
    85 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    150 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    28 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    C3
    C
    87.1 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 85 × 150 × 28 from other brands

    32 products
    Series illustration (not a photo of this item): 6217/C3
    You are viewingSKF 6217/C3

    Everything the number specifies matches: series 62, 85 × 150 × 28 mm, open, no protection, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 6217/C36217/C3This bearingSKF85 × 150 × 28available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6217 C36217 C3NTE85 × 150 × 2830 pcs€10.42
    02

    Often bought with this

    bore snap ring Ø150

    1 product
    • Bore snap ring Ø150CT SEG 150 W by 100Why it fits: DIN 472 snap ring for a 150 bore: holds the outer ring in the housing
      €86.47available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    8 machines1 makeby parts catalogues

    1. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus same geometry 1 assembly · 4 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. Belarus 2022/​2022V (2022.3/​2022V.3) Belarus same geometry 1 assembly · 4 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 2022/​2022V. 2022-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    3. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus same geometry 1 assembly · 4 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    4. Belarus 900/​920/​950/​952 (900.2/​900.3/​920.2/​920.3/​950.2/​950.3/​952.2/​952.3) Belarus same geometry 1 assembly · 4 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 900/​920/​950/​952. 900-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    5. Belarus 922.3/​922.4 Belarus same geometry 1 assembly · 4 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 922.3/​922.4. 922-0000010 KDS. Catalogue of parts and assembly units, 2013 (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 150d 85B 28
    d×D×Bsize 85 × 150 × 28mm
    Cdynamic 87.1kN

    Deep groove ball bearing 6217 C3.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet