+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €43.62 per piece.
6216-2RS1 · 80 × 140 × 26

Deep groove ball · 6216-2RS1

radial — mediumaxial — low, on both sides
    Drawing of 6216-2RS1: ⌀80 × ⌀140 × 26 mm6216-2RS12RS1
    Fig. 1: 6216-2RS1, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6216-2RS1

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6216-2RS1

    €52.78per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    4 exact, 19 approximate
    d
    80 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    140 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    26 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RS1contact seals on both sides
    Clearance
    normal clearance
    C0
    55 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
    01

    Equivalents

    the same size 80 × 140 × 26 from other brands

    23 products
    Photo: 6216-2RS1
    You are viewingSKF 6216-2RS1
    €52.78baseline for the price comparison

    Everything the number specifies matches: series 62, 80 × 140 × 26 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Photo: 6216-2RS16216-2RS1This bearingSKF80 × 140 × 26available to order€52.78you are here
    • Series illustration (not a photo of this item): 6216 2RS6216 2RSCT80 × 140 × 26available to order€6.85−€45.93
    • Photo: 6216 2RS6216 2RSZ&S80 × 140 × 26available to order€16.11−€36.67
    • Series illustration (not a photo of this item): 6216 2RS6216 2RSKG80 × 140 × 26available to orderon request

    Under the price: the difference from the price of this bearing (€52.78).
    02

    Often bought with this

    seal 80×140

    1 product
    • Seal 80×140JULU 080-140-13 TCWhy it fits: Oil seal 80×140: shaft 80 and housing bore 140, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 140d 80B 26
    d×D×Bsize 80 × 140 × 26mm
    C0static 55kN

    Deep groove ball bearing 6216-2RS, design 2RS1: contact seals on both sides. Under GOST the same bearing is designated 180216.

    C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180216?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0216 corresponds to the ISO base 6216. Size 80 × 140 × 26 mm, a full equivalent of 6216-2RS.

    Will 6216 2RS1 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet