+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €43.46 per piece.
6215 · 75 × 130 × 25

Deep groove ball · 6215

radial — mediumaxial — low, on both sides
    Drawing of 6215: ⌀75 × ⌀130 × 25 mm6215
    Fig. 1: 6215, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm
    Bearing SKF 6215 — photo 1
    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6215

    €52.59per piece incl. VAT
    In stock: 5 pcs
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    5 exact, 22 approximate
    d
    75 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    130 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    25 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C0
    49 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
    01

    Equivalents

    the same size 75 × 130 × 25 from other brands

    28 products
    Photo: 6215
    You are viewingSKF 6215
    €52.59baseline for the price comparison

    Everything the number specifies matches: series 62, 75 × 130 × 25 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Photo: 62156215This bearingSKF75 × 130 × 255 pcs€52.59you are here
    • Series illustration (not a photo of this item): 62156215CT75 × 130 × 25160 pcs€5.65−€46.94
    • Series illustration (not a photo of this item): 62156215NTE75 × 130 × 2530 pcs€7.95−€44.64
    • Series illustration (not a photo of this item): 62156215FAG75 × 130 × 25available to orderon request
    • Series illustration (not a photo of this item): 62156215KG75 × 130 × 25available to orderon request

    Under the price: the difference from the price of this bearing (€52.59).
    02

    Details

    what this bearing is, questions

    Where this bearing is fitted

    10 machines2 makesby parts catalogues

    1. KhTZ-16131, KhTZ-16331 KhTZ exactly this number 1 assembly · 1 pcs per machine

      manufacturer’s catalogue: Tractors KhTZ-16131, KhTZ-16331. Operator’s manual 161.00.000 RE

    2. KhTZ-17021, KhTZ-17221 KhTZ exactly this number 1 assembly · 1 pcs per machine

      manufacturer’s catalogue: Tractors KhTZ-17021 and KhTZ-17221. Operator’s manual 170.00.000 RE

    3. KhTZ-242K.20 KhTZ exactly this number 1 assembly · 1 pcs per machine

      manufacturer’s catalogue: Tractor KhTZ-242K.20. Operator’s manual

    4. KhTZ-243K.20 KhTZ exactly this number 1 assembly · 1 pcs per machine

      manufacturer’s catalogue: Tractor KhTZ-243K.20. Operator’s manual

    5. T-150K (KhTZ-150K-09-25) KhTZ exactly this number 1 assembly · 1 pcs per machine

      manufacturer’s catalogue: Tractor KhTZ-150K-09-25. Operator’s manual 151.00.000-09-25 RE

    Number in the manufacturer’s catalogue: by GOST (215) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 130d 75B 25
    d×D×Bsize 75 × 130 × 25mm
    C0static 49kN

    Deep groove ball bearing 6215. Under GOST the same bearing is designated 215.

    C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 215?

    It is the same bearing under GOST 3189-89: 215 corresponds to the ISO base 6215. Size 75 × 130 × 25 mm, a full equivalent of 6215.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    By make and unit

    this bearing is fitted in machines of these makes

    04

    Reviews

    No reviews yet