+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6213/C3 · 65 × 120 × 23

Deep groove ball · 6213 C3

radial — mediumaxial — low, on both sides
    Drawing of 6213 C3: ⌀65 × ⌀120 × 23 mm6213 C3
    Fig. 1: 6213 C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6213/C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6213/C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    2 exact, 30 approximate
    d
    65 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    120 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    23 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    C3
    C
    58.5 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 65 × 120 × 23 from other brands

    32 products
    Series illustration (not a photo of this item): 6213 C3
    You are viewingSKF 6213/C3

    Everything the number specifies matches: series 62, 65 × 120 × 23 mm, open, no protection, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 6213 C36213 C3This bearingSKF65 × 120 × 23available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6213/C36213/C3DYZV65 × 120 × 23available to orderon request
    02

    Often bought with this

    seal 65×120, shaft snap ring Ø65, bore snap ring Ø120

    5 products
    • Seal 65×120JULU 065-120-10 TCWhy it fits: Oil seal 65×120: shaft 65 and housing bore 120, the same as the bearing
      €1.23270 pcs
    • Seal 65×120JULU 065-120-12 TCWhy it fits: Oil seal 65×120: shaft 65 and housing bore 120, the same as the bearing
      €1.23available to order
    • Shaft snap ring Ø65CT SEG 65 Z by1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      €177.91available to order
    • Shaft snap ring Ø65SEG 65 Z by 1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø120CT SEG 120 W by 100Why it fits: DIN 472 snap ring for a 120 bore: holds the outer ring in the housing
      €65.88available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    8 machines2 makesby parts catalogues

    1. KhTZ-16131, KhTZ-16331 KhTZ same geometry 4 assemblies · 14 pcs per machine

      ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractors KhTZ-16131, KhTZ-16331. Operator’s manual 161.00.000 RE

    2. T-150-05-09-25, KhTZ-181 KhTZ same geometry 3 assemblies · 5 pcs per machine

      ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractors T-150-05-09-25 and KhTZ-181. Operator’s manual

    3. KhTZ-17021, KhTZ-17221 KhTZ same geometry 2 assemblies · 4 pcs per machine

      ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractors KhTZ-17021 and KhTZ-17221. Operator’s manual 170.00.000 RE

    4. KhTZ-242K.20 KhTZ same geometry 1 assembly · 2 pcs per machine

      ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractor KhTZ-242K.20. Operator’s manual

    5. KhTZ-243K.20 KhTZ same geometry 1 assembly · 2 pcs per machine

      ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractor KhTZ-243K.20. Operator’s manual

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 120d 65B 23
    d×D×Bsize 65 × 120 × 23mm
    Cdynamic 58.5kN

    Deep groove ball bearing 6213 C3.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet