+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6212/C4 · 60 × 110 × 22

Deep groove ball · 6212/C4

radial — mediumaxial — low, on both sides
    Drawing of 6212/C4: ⌀60 × ⌀110 × 22 mm6212/C4
    Fig. 1: 6212/C4, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6212/C4

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6212/C4

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 47 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    110 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    22 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    C4
    C
    55.3 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 60 × 110 × 22 from other brands

    48 products
    Series illustration (not a photo of this item): 6212/C4
    You are viewingSKF 6212/C4

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6212 ZZ6212 ZZmetal shields on both sides, normal clearanceCT60 × 110 × 22535 pcs€4.16
    • Series illustration (not a photo of this item): 6212 ZZ6212 ZZmetal shields on both sides, normal clearanceNTE60 × 110 × 22220 pcs€6.46
    • Series illustration (not a photo of this item): 6212 ZZ6212 ZZmetal shields on both sides, normal clearanceno brand60 × 110 × 22available to order€4.10
    • Photo: 6212 ZZ6212 ZZmetal shields on both sides, normal clearanceZ&S60 × 110 × 22available to order€9.04
    • Photo: 6212-2Z6212-2Zmetal shields on both sides, normal clearanceSKF60 × 110 × 22available to order€21.11
    • Photo: 6212-2Z/C36212-2Z/C3metal shields on both sides, clearance C3SKF60 × 110 × 22available to order€21.11
    • Series illustration (not a photo of this item): 6212-2Z/C46212-2Z/C4metal shields on both sidesSKF60 × 110 × 22available to order€28.31
    • Cross-section drawing to size: Deep groove ball, 60 × 110 × 22 mm6212 ZNRshield on one side, normal clearance, groove and snap ringCT60 × 110 × 22available to orderon request
    • Cross-section drawing to size: Deep groove ball, 60 × 110 × 22 mm6212 Zshield on one side, normal clearanceCT60 × 110 × 22available to orderon request
    • Cross-section drawing to size: Deep groove ball, 60 × 110 × 22 mm6212NZshield on one side, normal clearanceCT60 × 110 × 22available to orderon request
    02

    Often bought with this

    seal 60×110, shaft snap ring Ø60, bore snap ring Ø110

    4 products
    • Seal 60×110JULU 060-110-12 TCWhy it fits: Oil seal 60×110: shaft 60 and housing bore 110, the same as the bearing
      €1.05480 pcs
    • Seal 60×110JULU 060-110-10 TCWhy it fits: Oil seal 60×110: shaft 60 and housing bore 110, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø60CT SEG 60 Z by1000Why it fits: DIN 471 snap ring for a 60 shaft: holds the inner ring on the shaft
      €132.24out of stock
    • Bore snap ring Ø110CT SEG 110 W by 100Why it fits: DIN 472 snap ring for a 110 bore: holds the outer ring in the housing
      €51.47available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    7 machines2 makesby parts catalogues

    1. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus same geometry 5 assemblies · 6 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours has clearance C4; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. Belarus-80Kh/​80Kh.1/​100Kh Belarus same geometry 2 assemblies · 4 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours has clearance C4; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS-80Kh/​80Kh.1/​100Kh. 80Kh-0000010 KDS. Catalogue of assembly units and parts (RUE MTZ, 2012)

    3. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus same geometry 1 assembly · 2 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours has clearance C4; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    4. KhTZ-2511, KhTZ-3510 KhTZ same geometry 1 assembly · 2 pcs per machine

      ours has clearance C4; the machine takes normal (CN)

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    5. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus same geometry 1 assembly · 1 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours has clearance C4; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 110d 60B 22
    d×D×Bsize 60 × 110 × 22mm
    Cdynamic 55.3kN

    Deep groove ball bearing 6212 C4.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet