+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6211/C3 · 55 × 100 × 21

Deep groove ball · 6211/C3

radial — mediumaxial — low, on both sides
    Drawing of 6211/C3: ⌀55 × ⌀100 × 21 mm6211/C3
    Fig. 1: 6211/C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6211/C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6211/C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 45 approximate
    d
    55 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    100 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    21 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    C3
    C
    46.2 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 55 × 100 × 21 from other brands

    48 products
    Series illustration (not a photo of this item): 6211/C3
    You are viewingSKF 6211/C3

    Everything the number specifies matches: series 62, 55 × 100 × 21 mm, open, no protection, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 6211/C36211/C3This bearingSKF55 × 100 × 21available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6211 C36211 C3KG55 × 100 × 21available to orderon request
    02

    Often bought with this

    seal 55×100, shaft snap ring Ø55, bore snap ring Ø100

    4 products
    • Seal 55×100JULU 055-100-10 TCWhy it fits: Oil seal 55×100: shaft 55 and housing bore 100, the same as the bearing
      €0.98630 pcs
    • Seal 55×100SUPTEX 55x100x13Why it fits: Oil seal 55×100: shaft 55 and housing bore 100, the same as the bearing
      €4.57available to order
    • Shaft snap ring Ø55CT SEG 55 Z by1000Why it fits: DIN 471 snap ring for a 55 shaft: holds the inner ring on the shaft
      €125.77available to order
    • Bore snap ring Ø100CT SEG 100 W by 100Why it fits: DIN 472 snap ring for a 100 bore: holds the outer ring in the housing
      €28.8214 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    8 machines3 makesby parts catalogues

    1. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus same geometry 3 assemblies · 3 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    2. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus same geometry 2 assemblies · 4 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    3. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus same geometry 1 assembly · 1 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    4. Belarus 821/​921 (821.2/​821.3/​921.2/​921.3) Belarus same geometry 1 assembly · 1 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 821/​921. 921-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    5. Belarus 900/​920/​950/​952 (900.2/​900.3/​920.2/​920.3/​950.2/​950.3/​952.2/​952.3) Belarus same geometry 1 assembly · 1 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 900/​920/​950/​952. 900-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 100d 55B 21
    d×D×Bsize 55 × 100 × 21mm
    Cdynamic 46.2kN

    Deep groove ball bearing 6211 C3.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet