+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6210-ZZ · 50 × 90 × 20

Deep groove ball · 6210 ZZ

radial — mediumaxial — low, on both sides
    Drawing of 6210 ZZ: ⌀50 × ⌀90 × 20 mm6210 ZZZZ
    Fig. 1: 6210 ZZ, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6210-ZZ

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6210-ZZ

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    OEM number
    560.03.630
    Equivalents
    9 exact, 66 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    90 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    20 mm
    Width BRing width. Source: two supplier sources
    Seal
    ZZshields, both sides
    Clearance
    normal clearance
    C
    37.1 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 50 × 90 × 20 from other brands

    77 products
    Photo: 6210 ZZ
    You are viewingSKF 6210-ZZ

    Everything the number specifies matches: series 62, 50 × 90 × 20 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Photo: 6210 ZZ6210 ZZThis bearingSKF50 × 90 × 20out of stockon requestyou are here
    • Series illustration (not a photo of this item): 6210 ZZ6210 ZZCT50 × 90 × 20399 pcs€2.71
    • Series illustration (not a photo of this item): 6210 ZZ6210 ZZNTE50 × 90 × 20288 pcs€4.09
    • Photo: 6210 2Z6210 2ZFAG50 × 90 × 20299 pcs€11.02
    • Photo: 6210 ZZ6210 ZZZ&S50 × 90 × 20available to order€6.23
    • Photo: 6210-2Z6210-2ZSKF50 × 90 × 20available to order€14.48
    • Series illustration (not a photo of this item): 6210 ZZ6210 ZZFKL50 × 90 × 20out of stockon request
    • Series illustration (not a photo of this item): 6210 ZZ6210 ZZKG50 × 90 × 20available to orderon request
    • Series illustration (not a photo of this item): 6210 ZZE6210 ZZENACHI50 × 90 × 20available to orderon request
    02

    Often bought with this

    shaft snap ring Ø50, bore snap ring Ø90, seal 50×90

    5 products
    • Shaft snap ring Ø50CT SEG 50 Z by 1000Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      €115.29available to order
    • Shaft snap ring Ø50SEG 50 Z (100 pcs)Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø90CT SEG 90 W by 100Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      €23.89available to order
    • Bore snap ring Ø90SEG 90 W by 1000Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 50×90JULU 050-90-10 TCWhy it fits: Oil seal 50×90: shaft 50 and housing bore 90, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.73280 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    18 machines3 makesby parts catalogues

    1. Belarus-80Kh/​80Kh.1/​100Kh Belarus same geometry 8 assemblies · 11 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours: shields on both sides (ZZ); in the machine: shield on one side

      manufacturer’s catalogue: BELARUS-80Kh/​80Kh.1/​100Kh. 80Kh-0000010 KDS. Catalogue of assembly units and parts (RUE MTZ, 2012)

    2. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus same geometry 7 assemblies · 10 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours: shields on both sides (ZZ); in the machine: shield on one side

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    3. Belarus 922.3/​922.4 Belarus same geometry 6 assemblies · 8 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours: shields on both sides (ZZ); in the machine: shield on one side

      manufacturer’s catalogue: BELARUS 922.3/​922.4. 922-0000010 KDS. Catalogue of parts and assembly units, 2013 (RUE MTZ)

    4. Belarus 1523/​1523V/​1523.3 Belarus same geometry 4 assemblies · 5 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours: shields on both sides (ZZ); in the machine: open

      manufacturer’s catalogue: BELARUS 1523/​1523V/​1523.3. 1523-0000010 KDS. Catalogue of assembly units and parts, 2013 (RUE MTZ)

    5. Belarus 821/​921 (821.2/​821.3/​921.2/​921.3) Belarus same geometry 4 assemblies · 5 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours: shields on both sides (ZZ); in the machine: open

      manufacturer’s catalogue: BELARUS 821/​921. 921-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by GOST (80210) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 90d 50B 20
    d×D×Bsize 50 × 90 × 20mm
    Cdynamic 37.1kN

    Deep groove ball bearing 6210-ZZ, design ZZ: metal shields on both sides. Under GOST the same bearing is designated 80210.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 80210?

    It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0210 corresponds to the ISO base 6210. Size 50 × 90 × 20 mm, a full equivalent of 6210-ZZ.

    Will 6210 ZZ C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet