+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €5.16 per piece.
6206-2RS1 · 30 × 62 × 16

Deep groove ball · 6206-2RS1

radial — mediumaxial — low, on both sides
    Drawing of 6206-2RS1: ⌀30 × ⌀62 × 16 mm6206-2RS12RS1
    Fig. 1: 6206-2RS1, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6206-2RS1

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6206-2RS1

    €6.24per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    12 exact, 77 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    16 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RS1contact seals on both sides
    Clearance
    normal clearance
    C0
    11.2 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
    m
    0.2 kg
    MassWeight of the product. Source: two supplier sources
    01

    Equivalents

    the same size 30 × 62 × 16 from other brands

    92 products
    Photo: 6206-2RS1
    You are viewingSKF 6206-2RS1
    €6.24baseline for the price comparison

    Everything the number specifies matches: series 62, 30 × 62 × 16 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Photo: 6206-2RS16206-2RS1This bearingSKF30 × 62 × 16available to order€6.24you are here
    • Series illustration (not a photo of this item): 6206 2RS6206 2RSCT30 × 62 × 1610,167 pcs€1.05−€5.19
    • Series illustration (not a photo of this item): 6206 2RS6206 2RSNTE30 × 62 × 165,683 pcs€1.51−€4.73
    • Series illustration (not a photo of this item): 6206 2RS6206 2RSKoyo30 × 62 × 16349 pcs€5.55−€0.69
    • Photo: 6206 2RS6206 2RSKLT30 × 62 × 16available to order€0.93−€5.31
    • Photo: 6206 2RS6206 2RSZ&S30 × 62 × 16available to order€1.89−€4.35
    • Series illustration (not a photo of this item): 6206 2NSE6206 2NSENACHI30 × 62 × 16available to order€4.65−€1.59
    • Photo: 6206 2RS6206 2RSTIMKEN30 × 62 × 16available to order€8.13+€1.89
    • Photo: 6206 2RS6206 2RSFAG30 × 62 × 16out of stockon request
    • Series illustration (not a photo of this item): 6206 2RS6206 2RSKG30 × 62 × 16available to orderon request

    Under the price: the difference from the price of this bearing (€6.24).
    02

    Often bought with this

    shaft snap ring Ø30, bore snap ring Ø62, seal 30×62

    5 products
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    • Seal 30×62JULU 030-62-7 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.39480 pcs
    • Seal 30×62JULU 030-62-10 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.401,764 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    16 machines4 makesby parts catalogues

    1. VBP 2160 (baler) Kuhn exactly this number 3 assemblies · 11 pcs per machine

      manufacturer’s catalogue: kuhn_vbp-2160

    2. Gaspardo Nina 250/​300/​400 Maschio Gaspardo exactly this number 1 assembly

      manufacturer’s catalogue: maschio_nina-2007

    3. Gaspardo Nina 250/​300/​400 (mechanical seed drill) Maschio Gaspardo exactly this number 1 assembly

      manufacturer’s catalogue: maschio_nina-2015

    4. Belarus-152 Belarus same geometry 2 assemblies · 2 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    5. KhTZ-2511, KhTZ-3510 KhTZ same geometry 1 assembly · 3 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    Number in the manufacturer’s catalogue: by GOST (180206) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 62d 30B 16
    d×D×Bsize 30 × 62 × 16mm
    C0static 11.2kN
    mweight 0.2kg

    Deep groove ball bearing 6206-2RS, design 2RS1: contact seals on both sides. Under GOST the same bearing is designated 180206.

    C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180206?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0206 corresponds to the ISO base 6206. Size 30 × 62 × 16 mm, a full equivalent of 6206-2RS.

    Will 6206 2RS1 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet