+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6205-2Z/C3WT · 25 × 52 × 15

Deep groove ball · 6205-2Z/C3WT

radial — mediumaxial — low, on both sides
    Drawing of 6205-2Z/C3WT: ⌀25 × ⌀52 × 15 mm6205-2Z/C3WT2Z
    Fig. 1: 6205-2Z/C3WT, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6205-2Z/C3WT

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6205-2Z/C3WT

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 81 approximate
    d
    25 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    52 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    15 mm
    Width BRing width. Source: supplier data
    Seal
    2Zmetal shields on both sides
    Clearance
    C3
    C
    14.8 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 25 × 52 × 15 from other brands

    83 products
    Drawing: 6205-2Z/C3WT
    You are viewingSKF 6205-2Z/C3WT

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6205 2RS6205 2RScontact seals on both sides, normal clearance, standard designCT25 × 52 × 1515,762 pcs€0.82
    • Series illustration (not a photo of this item): 6205 2RS C36205 2RS C3contact seals on both sides, standard designCT25 × 52 × 152,458 pcs€0.86
    • Series illustration (not a photo of this item): 6205 2RSC36205 2RSC3contact seals on both sides, standard designNTE25 × 52 × 15895 pcs€0.93
    • Series illustration (not a photo of this item): 6205 2RS6205 2RScontact seals on both sides, normal clearance, standard designNTE25 × 52 × 159,853 pcs€0.98
    • Cross-section drawing to size: Deep groove ball, 25 × 52 × 15 mmK 6205 2RScontact seals on both sides, K: not decodedCT25 × 52 × 1540 pcs€1.23
    • Drawing: SS 6205-2RSSS 6205-2RScontact seals on both sides, normal clearance, stainless steelCT25 × 52 × 15930 pcs€3.16
    • Series illustration (not a photo of this item): 6205 2NSE6205 2NSEcontact seals on both sides, normal clearance, standard designNACHI25 × 52 × 15100 pcs€3.47
    • Series illustration (not a photo of this item): 6205 2NSE C36205 2NSE C3contact seals on both sides, standard designNACHI25 × 52 × 1570 pcs€3.47
    • Photo: 6205 2RS C36205 2RS C3contact seals on both sides, standard designKoyo25 × 52 × 15187 pcs€4.17
    • Series illustration (not a photo of this item): 6205 2RSH/C36205 2RSH/C3contact seals on both sides, standard designSKF25 × 52 × 15397 pcs€4.25
    02

    Often bought with this

    shaft snap ring Ø25, bore snap ring Ø52, seal 25×52

    6 products
    • Shaft snap ring Ø25CT SEG 25 Z by 1000Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      €31.6125 pcs
    • Shaft snap ring Ø25SEG 25 Z (100 pcs)Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø52CT SEG 52 W by 1000Why it fits: DIN 472 snap ring for a 52 bore: holds the outer ring in the housing
      €86.47available to order
    • Bore snap ring Ø52CT-RING SEG 52 W (100 pcs)Why it fits: DIN 472 snap ring for a 52 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 25×52JULU 025-52-10 TCWhy it fits: Oil seal 25×52: shaft 25 and housing bore 52, the same as the bearing; the bearing has its own seals (2Z), and the oil seal closes the unit from outside
      €0.392,950 pcs
    • Seal 25×52JULU 025-52-7 TCWhy it fits: Oil seal 25×52: shaft 25 and housing bore 52, the same as the bearing; the bearing has its own seals (2Z), and the oil seal closes the unit from outside
      €0.397,720 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    10 machines4 makesby parts catalogues

    1. VBP 2160 (baler) Kuhn same geometry 5 assemblies · 14 pcs per machine

      ours: shields on both sides (ZZ); in the machine: seals on both sides (2RS); ours has clearance C3; the machine takes normal (CN); ours has WT

      manufacturer’s catalogue: kuhn_vbp-2160

    2. KhTZ-2511, KhTZ-3510 KhTZ same geometry 1 assembly · 1 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; ours has clearance C3; the machine takes normal (CN); ours has WT

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    3. Maschio Tigre (disc harrow) Maschio Gaspardo same geometry 1 assembly

      ours: shields on both sides (ZZ); in the machine: seals on both sides (2RS); ours has clearance C3; the machine takes normal (CN); ours has WT

      manufacturer’s catalogue: maschio_tigre-2016

    4. Maschio U/​UL/​Cobra (rotary tiller) Maschio Gaspardo same geometry 1 assembly

      ours: shields on both sides (ZZ); in the machine: seals on both sides (2RS); ours has clearance C3; the machine takes normal (CN); ours has WT

      manufacturer’s catalogue: maschio_u-ul-cobra-2006

    5. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus check the version 3 assemblies · 4 pcs per machine

      the machine has S17; ours does not; ours: shields on both sides (ZZ); in the machine: seals on both sides (2RS); ours has clearance C3; the machine takes normal (CN); ours has WT; not decoded: mark “K1” in the machine catalogue

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 52d 25B 15
    d×D×Bsize 25 × 52 × 15mm
    Cdynamic 14.8kN

    Deep groove ball bearing 6205-ZZ C3, design 2Z: metal shields on both sides.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet