+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6204-ZZ · 20 × 47 × 14

Deep groove ball · 6204 ZZ

radial — mediumaxial — low, on both sides
    Drawing of 6204 ZZ: ⌀20 × ⌀47 × 14 mm6204 ZZZZ
    Fig. 1: 6204 ZZ, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6204-ZZ

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6204-ZZ

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    13 exact, 100 approximate
    d
    20 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    47 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    14 mm
    Width BRing width. Source: two supplier sources
    Seal
    ZZshields, both sides
    Clearance
    normal clearance
    C
    13.5 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    6.55 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    01

    Equivalents

    the same size 20 × 47 × 14 from other brands

    117 products
    Photo: 6204 ZZ
    You are viewingSKF 6204-ZZ

    Everything the number specifies matches: series 62, 20 × 47 × 14 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Photo: 6204 ZZ6204 ZZThis bearingSKF20 × 47 × 14out of stockon requestyou are here
    • Series illustration (not a photo of this item): 6204 ZZ6204 ZZCT20 × 47 × 1454,695 pcs€0.65
    • Series illustration (not a photo of this item): 6204 ZZ6204 ZZNTE20 × 47 × 141,850 pcs€0.83
    • Series illustration (not a photo of this item): 6204 ZZ6204 ZZKoyo20 × 47 × 1464 pcs€3.12
    • Photo: 6204 ZZ6204 ZZKLT20 × 47 × 14available to order€0.35
    • Photo: 6204 ZZ6204 ZZWBW20 × 47 × 14available to order€1.37
    • Photo: 6204 ZZ6204 ZZFAG20 × 47 × 14available to order€3.33
    • Photo: 6204 ZZ6204 ZZNSK20 × 47 × 14available to order€3.33
    • Photo: 6204 ZZ6204 ZZTIMKEN20 × 47 × 14available to order€3.33
    • Photo: 6204-2Z6204-2ZSKF20 × 47 × 14available to order€3.44
    02

    Often bought with this

    shaft snap ring Ø20, bore snap ring Ø47, seal 20×47

    5 products
    • Shaft snap ring Ø20CT SEG 20 Z by 1000Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      €22.57available to order
    • Shaft snap ring Ø20SEG 20 Z (100 pcs)Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø47CT SEG 47 W by 1000Why it fits: DIN 472 snap ring for a 47 bore: holds the outer ring in the housing
      €90.2811 pcs
    • Seal 20×47JULU 020-47-10 TCWhy it fits: Oil seal 20×47: shaft 20 and housing bore 47, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.29700 pcs
    • Seal 20×47JULU 020-47-7 TCWhy it fits: Oil seal 20×47: shaft 20 and housing bore 47, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.293,920 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    11 machines4 makesby parts catalogues

    1. KhTZ-2511, KhTZ-3510 KhTZ same geometry 4 assemblies · 6 pcs per machine

      the machine has A; ours does not; ours: shields on both sides (ZZ); in the machine: open

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    2. Gaspardo Primavera (pneumatic seed drill) Maschio Gaspardo same geometry 4 assemblies

      ours: shields on both sides (ZZ); in the machine: seals on both sides (2RS)

      manufacturer’s catalogue: maschio_primavera-2009

    3. VBP 2160 (baler) Kuhn same geometry 2 assemblies · 5 pcs per machine

      ours: shields on both sides (ZZ); in the machine: seals on both sides (2RS)

      manufacturer’s catalogue: kuhn_vbp-2160

    4. Belarus-152 Belarus same geometry 2 assemblies · 4 pcs per machine

      the machine has A; ours does not; ours: shields on both sides (ZZ); in the machine: open

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    5. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus same geometry 2 assemblies · 3 pcs per machine

      the machine has A; ours does not; the machine has S17; ours does not; ours: shields on both sides (ZZ); in the machine: seals on both sides (2RS); ours is P0; the machine takes P6

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    Number in the manufacturer’s catalogue: by GOST (80204) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 47d 20B 14
    d×D×Bsize 20 × 47 × 14mm
    Cdynamic 13.5kN
    C0static 6.55kN

    Deep groove ball bearing 6204-ZZ, design ZZ: metal shields on both sides. Under GOST the same bearing is designated 80204.

    C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 80204?

    It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0204 corresponds to the ISO base 6204. Size 20 × 47 × 14 mm, a full equivalent of 6204-ZZ.

    Will 6204 ZZ C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet