+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €8.00 per piece.
62/22-2RS1 · 22 × 50 × 14

Deep groove ball · 62/22-2RS1

radial — mediumaxial — low, on both sides
    Drawing of 62/22-2RS1: ⌀22 × ⌀50 × 14 mm62/22-2RS12RS1
    Fig. 1: 62/22-2RS1, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 62/22-2RS1

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 62/22-2RS1

    €9.68per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 3 approximate
    d
    22 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    50 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    14 mm
    Width BRing width. Source: supplier data
    Seal
    2RS1contact seals on both sides
    Clearance
    normal clearance
    C0
    7.65 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.12 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 22 × 50 × 14 from other brands

    5 products
    Photo: 62/22-2RS1
    You are viewingSKF 62/22-2RS1
    €9.68baseline for the price comparison

    Same size, different design: the difference is written in the row.

    • Photo: 62/22 2RS C362/22 2RS C3clearance C3Z&S22 × 50 × 14available to order€3.07−€6.61
    • Photo: 62/22 2RS C362/22 2RS C3clearance C3Koyo22 × 50 × 14available to order€21.51+€11.83
    • Photo: 62/22/2362/22/2323: not decodedSKF22 × 50 × 14out of stockon request

    Under the price: the difference from the price of this bearing (€9.68).
    02

    Often bought with this

    shaft snap ring Ø22, bore snap ring Ø50

    2 products
    • Shaft snap ring Ø22CT SEG 22 Z by1000Why it fits: DIN 471 snap ring for a 22 shaft: holds the inner ring on the shaft
      €16.652 pcs
    • Bore snap ring Ø50CT SEG 50 W by 1000Why it fits: DIN 472 snap ring for a 50 bore: holds the outer ring in the housing
      €86.478 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 50d 22B 14
    d×D×Bsize 22 × 50 × 14mm
    C0static 7.65kN
    mweight 0.12kg

    Deep groove ball bearing 62/22-2RS, design 2RS1: contact seals on both sides.

    C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Will 62/22 2RS1 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet