+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
61936 MA · 180 × 250 × 33

Deep groove ball · 61936 MA

radial — mediumaxial — low, on both sides
    Drawing of 61936 MA: ⌀180 × ⌀250 × 33 mm61936 MA
    Fig. 1: 61936 MA, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 61936 MA

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 61936 MA

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 1 approximate
    d
    180 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    250 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    33 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    119 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 180 × 250 × 33 from other brands

    2 products
    Drawing: 61936 MA
    You are viewingSKF 61936 MA

    Same size, different design: the difference is written in the row.

    • Drawing: 6193661936standard designFAG180 × 250 × 33available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    D 250d 180B 33
    d×D×Bsize 180 × 250 × 33mm
    Cdynamic 119kN

    Deep groove ball bearing 61936.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet