+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
61918 · 90 × 125 × 18

Deep groove ball · 61918

radial — mediumaxial — low, on both sides
    Drawing of 61918: ⌀90 × ⌀125 × 18 mm61918
    Fig. 1: 61918, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 61918

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 61918

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    1 exact, 5 approximate
    d
    90 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    125 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    18 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 90 × 125 × 18 from other brands

    6 products
    Series illustration (not a photo of this item): 61918
    You are viewingSKF 61918

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6918 / 61918 2RS6918 / 61918 2RScontact seals on both sidesCT90 × 125 × 18200 pcs€7.22
    • Photo: 61918 2RS61918 2RScontact seals on both sidesNTN90 × 125 × 18available to order€121.12
    • Series illustration (not a photo of this item): 6918 2RS6918 2RScontact seals on both sidesno brand90 × 125 × 18available to orderon request
    • Drawing: 6918ZZ/2AS6918ZZ/2ASmetal shields on both sides, 2ASNTN90 × 125 × 18available to orderon request
    • Drawing: 61918 C361918 C3clearance C3ZEN90 × 125 × 18available to orderon request
    02

    Often bought with this

    bore snap ring Ø125

    1 product
    • Bore snap ring Ø125CT SEG 125 W by 100Why it fits: DIN 472 snap ring for a 125 bore: holds the outer ring in the housing
      €67.941 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 125d 90B 18
    d×D×Bsize 90 × 125 × 18mm

    Deep groove ball bearing 61918. Under GOST the same bearing is designated 1000918.

    Frequently asked questions

    What is 1000918?

    It is the same bearing under GOST 3189-89: 1000918 corresponds to the ISO base 61918. Size 90 × 125 × 18 mm, a full equivalent of 61918.

    Will 61918 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet