+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
61907 · 35 × 55 × 10

Deep groove ball · 61907

radial — mediumaxial — low, on both sides
    Drawing of 61907: ⌀35 × ⌀55 × 10 mm61907
    Fig. 1: 61907, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 61907

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 61907

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    5 exact, 13 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    55 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    10 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 35 × 55 × 10 from other brands

    18 products
    Series illustration (not a photo of this item): 61907
    You are viewingSKF 61907

    Everything the number specifies matches: series 619, 35 × 55 × 10 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 6190761907This bearingSKF35 × 55 × 10available to orderon requestyou are here
    • Drawing: 69076907CT35 × 55 × 1050 pcs€1.04
    • Drawing: 6907 / 619076907 / 61907CT35 × 55 × 10200 pcs€1.04
    • Drawing: 69076907no brand35 × 55 × 10available to orderon request
    • Drawing: 69076907KG35 × 55 × 10available to orderon request
    02

    Often bought with this

    seal 35×55, shaft snap ring Ø35, bore snap ring Ø55

    5 products
    • Seal 35×55JULU 035-55-10 TCWhy it fits: Oil seal 35×55: shaft 35 and housing bore 55, the same as the bearing
      €0.361,118 pcs
    • Seal 35×55JULU 035-55-7 TCWhy it fits: Oil seal 35×55: shaft 35 and housing bore 55, the same as the bearing
      €0.36233 pcs
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø55CT SEG 55 W by 1000Why it fits: DIN 472 snap ring for a 55 bore: holds the outer ring in the housing
      €90.59available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 55d 35B 10
    d×D×Bsize 35 × 55 × 10mm

    Deep groove ball bearing 61907. Under GOST the same bearing is designated 1000907.

    Frequently asked questions

    What is 1000907?

    It is the same bearing under GOST 3189-89: 1000907 corresponds to the ISO base 61907. Size 35 × 55 × 10 mm, a full equivalent of 61907.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet