+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
61907-2RZ · 35 × 55 × 10

Deep groove ball · 61907 -2RZ

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 61907 -2RZ: ⌀35 × ⌀55 × 10 mm⌀55⌀351061907 -2RZ2RZ
    Fig. 1: 61907 -2RZ, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 61907-2RZ

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 61907-2RZ

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 17 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    55 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    10 mm
    Width BRing width. Source: supplier data
    Seal
    2RZrubber non-contact, both sides
    Clearance
    normal clearance
    C
    10.8 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 35 × 55 × 10 from other brands

    18 products
    Cross-section drawing to size: Deep groove ball, 35 × 55 × 10 mm
    You are viewingSKF 61907-2RZ

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6907 / 61907 2RS6907 / 61907 2RScontact seals on both sidesCT35 × 55 × 10849 pcs€0.82
    • Series illustration (not a photo of this item): 6907 2RS6907 2RScontact seals on both sidesCT35 × 55 × 10available to orderon request
    • Series illustration (not a photo of this item): 61907 2RS61907 2RScontact seals on both sidesCT35 × 55 × 10available to orderon request
    • Series illustration (not a photo of this item): 6907 2RS6907 2RScontact seals on both sidesKG35 × 55 × 10available to orderon request
    • Drawing: 6907DDUCM NS7S56907DDUCM NS7S5contact seals on both sides, clearance CM, 5, NS7SNSK35 × 55 × 10available to orderon request
    • Series illustration (not a photo of this item): 61907-2RS161907-2RS1contact seals on both sidesSKF35 × 55 × 10available to orderon request
    • Photo: 61907 2RS61907 2RScontact seals on both sidesZ&S35 × 55 × 10out of stockon request
    • Drawing: 69076907open, no protectionCT35 × 55 × 1050 pcs€1.04
    • Drawing: 6907 / 619076907 / 61907open, no protectionCT35 × 55 × 10200 pcs€1.04
    • Drawing: 69076907open, no protectionno brand35 × 55 × 10available to orderon request
    02

    Often bought with this

    shaft snap ring Ø35, bore snap ring Ø55, seal 35×55

    5 products
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø55CT SEG 55 W by 1000Why it fits: DIN 472 snap ring for a 55 bore: holds the outer ring in the housing
      €90.59available to order
    • Seal 35×55JULU 035-55-10 TCWhy it fits: Oil seal 35×55: shaft 35 and housing bore 55, the same as the bearing; the bearing has its own seals (2RZ), and the oil seal closes the unit from outside
      €0.361,118 pcs
    • Seal 35×55JULU 035-55-7 TCWhy it fits: Oil seal 35×55: shaft 35 and housing bore 55, the same as the bearing; the bearing has its own seals (2RZ), and the oil seal closes the unit from outside
      €0.36233 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 55d 35B 10
    d×D×Bsize 35 × 55 × 10mm
    Cdynamic 10.8kN

    Deep groove ball bearing 61907 -2RZ, design 2RZ: non-contact seals on both sides.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet