+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
61905 · 25 × 42 × 9

Deep groove ball · 61905

radial — mediumaxial — low, on both sides
    Drawing of 61905: ⌀25 × ⌀42 × 9 mm61905
    Fig. 1: 61905, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 61905

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 61905

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    2 exact, 24 approximate
    d
    25 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    42 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    9 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 25 × 42 × 9 from other brands

    27 products
    Series illustration (not a photo of this item): 61905
    You are viewingSKF 61905

    Everything the number specifies matches: series 619, 25 × 42 × 9 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 6190561905This bearingSKF25 × 42 × 9available to orderon requestyou are here
    • Drawing: 6190561905FAG25 × 42 × 9available to orderon request
    02

    Often bought with this

    seal 25×42, shaft snap ring Ø25, bore snap ring Ø42

    5 products
    • Seal 25×42JULU 025-42-10 TCWhy it fits: Oil seal 25×42: shaft 25 and housing bore 42, the same as the bearing
      €0.28123 pcs
    • Seal 25×42JULU 025-42-7 TCWhy it fits: Oil seal 25×42: shaft 25 and housing bore 42, the same as the bearing
      €0.292,315 pcs
    • Shaft snap ring Ø25CT SEG 25 Z by 1000Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      €31.6125 pcs
    • Shaft snap ring Ø25SEG 25 Z (100 pcs)Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø42CT SEG 42 W by 1000Why it fits: DIN 472 snap ring for a 42 bore: holds the outer ring in the housing
      €45.155 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. Belarus 1523/​1523V/​1523.3 Belarus check the version 1 assembly · 1 pcs per machine

      not decoded: mark “EE” in the machine catalogue

      manufacturer’s catalogue: BELARUS 1523/​1523V/​1523.3. 1523-0000010 KDS. Catalogue of assembly units and parts, 2013 (RUE MTZ)

    Number in the manufacturer’s catalogue: by GOST (1000905) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 42d 25B 9
    d×D×Bsize 25 × 42 × 9mm

    Deep groove ball bearing 61905. Under GOST the same bearing is designated 1000905.

    Frequently asked questions

    What is 1000905?

    It is the same bearing under GOST 3189-89: 1000905 corresponds to the ISO base 61905. Size 25 × 42 × 9 mm, a full equivalent of 61905.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet