+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
61901-2Z · 12 × 24 × 6

Deep groove ball · 61901-2Z

radial — mediumaxial — low, on both sides
    Drawing of 61901-2Z: ⌀12 × ⌀24 × 6 mm61901-2Z2Z
    Fig. 1: 61901-2Z, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 61901-2Z

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 61901-2Z

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    5 exact, 14 approximate
    d
    12 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    24 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    6 mm
    Width BRing width. Source: supplier data
    Seal
    2Zmetal shields on both sides
    Clearance
    normal clearance
    C
    2.91 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 12 × 24 × 6 from other brands

    19 products
    Series illustration (not a photo of this item): 61901-2Z
    You are viewingSKF 61901-2Z

    Everything the number specifies matches: series 619, 12 × 24 × 6 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 61901-2Z61901-2ZThis bearingSKF12 × 24 × 6available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6901 / 61901 ZZ6901 / 61901 ZZCT12 × 24 × 69,549 pcs€0.28
    • Series illustration (not a photo of this item): 61901 ZZ61901 ZZno brand12 × 24 × 6available to orderon request
    • Series illustration (not a photo of this item): 6901 ZZ6901 ZZCT12 × 24 × 6available to orderon request
    • Series illustration (not a photo of this item): 6901 ZZ6901 ZZKG12 × 24 × 6available to orderon request
    02

    Often bought with this

    shaft snap ring Ø12, bore snap ring Ø24, seal 12×24

    5 products
    • Shaft snap ring Ø12CT SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
      €0.61available to order
    • Shaft snap ring Ø12SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø24CT SEG 24 W by 1000Why it fits: DIN 472 snap ring for a 24 bore: holds the outer ring in the housing
      €18.542 pcs
    • Seal 12×24JULU 012-24-7 TCWhy it fits: Oil seal 12×24: shaft 12 and housing bore 24, the same as the bearing; the bearing has its own seals (2Z), and the oil seal closes the unit from outside
      €0.18370 pcs
    • Seal 12×24JULU 012-24-6 TCWhy it fits: Oil seal 12×24: shaft 12 and housing bore 24, the same as the bearing; the bearing has its own seals (2Z), and the oil seal closes the unit from outside
      €0.17available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 24d 12B 6
    d×D×Bsize 12 × 24 × 6mm
    Cdynamic 2.91kN

    Deep groove ball bearing 61901-ZZ, design 2Z: metal shields on both sides.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet