+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
61900-2RS1 · 10 × 22 × 6

Deep groove ball · 61900-2RS1

radial — mediumaxial — low, on both sides
    Drawing of 61900-2RS1: ⌀10 × ⌀22 × 6 mm61900-2RS12RS1
    Fig. 1: 61900-2RS1, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 61900-2RS1

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 61900-2RS1

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    9 exact, 14 approximate
    d
    10 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    22 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    6 mm
    Width BRing width. Source: supplier data
    Seal
    2RS1contact seals on both sides
    Clearance
    normal clearance
    C
    2.7 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 10 × 22 × 6 from other brands

    26 products
    Series illustration (not a photo of this item): 61900-2RS1
    You are viewingSKF 61900-2RS1

    Everything the number specifies matches: series 619, 10 × 22 × 6 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 61900-2RS161900-2RS1This bearingSKF10 × 22 × 6available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6900 / 61900 2RS6900 / 61900 2RSCT10 × 22 × 68,085 pcs€0.28
    • Photo: 61900 2RS61900 2RSNTN10 × 22 × 6available to order€10.49
    • Series illustration (not a photo of this item): 61900 2RS61900 2RSno brand10 × 22 × 6available to orderon request
    • Series illustration (not a photo of this item): 6900 2RS6900 2RSno brand10 × 22 × 6available to orderon request
    • Series illustration (not a photo of this item): 6900 2RS6900 2RSCT10 × 22 × 6available to orderon request
    • Series illustration (not a photo of this item): 61900 2RS61900 2RSCT10 × 22 × 6available to orderon request
    • Series illustration (not a photo of this item): 6900 2RS6900 2RSKG10 × 22 × 6available to orderon request
    • Series illustration (not a photo of this item): 6900 2NSE6900 2NSENACHI10 × 22 × 6available to orderon request
    02

    Often bought with this

    shaft snap ring Ø10, bore snap ring Ø22, seal 10×22

    4 products
    • Shaft snap ring Ø10CT SEG 10 Z by1000Why it fits: DIN 471 snap ring for a 10 shaft: holds the inner ring on the shaft
      €6.101 pcs
    • Bore snap ring Ø22CT SEG 22 W by 1000Why it fits: DIN 472 snap ring for a 22 bore: holds the outer ring in the housing
      €15.65out of stock
    • Seal 10×22JULU 010-22-7 SCWhy it fits: Oil seal 10×22: shaft 10 and housing bore 22, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.1770 pcs
    • Seal 10×22JULU 010-22-7 TCWhy it fits: Oil seal 10×22: shaft 10 and housing bore 22, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.17690 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 22d 10B 6
    d×D×Bsize 10 × 22 × 6mm
    Cdynamic 2.7kN

    Deep groove ball bearing 61900-2RS, design 2RS1: contact seals on both sides.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet