+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
61815-2RS1 · 75 × 95 × 10

Deep groove ball · 61815-2RS1

radial — mediumaxial — low, on both sides
    Drawing of 61815-2RS1: ⌀75 × ⌀95 × 10 mm61815-2RS12RS1
    Fig. 1: 61815-2RS1, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 61815-2RS1

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 61815-2RS1

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    3 exact, 2 approximate
    d
    75 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    95 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    10 mm
    Width BRing width. Source: supplier data
    Seal
    2RS1contact seals on both sides
    Clearance
    normal clearance
    C
    12.7 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 75 × 95 × 10 from other brands

    5 products
    Series illustration (not a photo of this item): 61815-2RS1
    You are viewingSKF 61815-2RS1

    Everything the number specifies matches: series 618, 75 × 95 × 10 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 61815-2RS161815-2RS1This bearingSKF75 × 95 × 10available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6815 / 61815 2RS6815 / 61815 2RSCT75 × 95 × 10117 pcs€3.96
    • Series illustration (not a photo of this item): 61815 2RS61815 2RSno brand75 × 95 × 10available to orderon request
    02

    Often bought with this

    bore snap ring Ø95, seal 75×95

    3 products
    • Bore snap ring Ø95CT-RING SEG 95 W by 100Why it fits: DIN 472 snap ring for a 95 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 75×95JULU 075-95-10 TCWhy it fits: Oil seal 75×95: shaft 75 and housing bore 95, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.65515 pcs
    • Seal 75×95JULU 075-95-12 TCWhy it fits: Oil seal 75×95: shaft 75 and housing bore 95, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.75380 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 95d 75B 10
    d×D×Bsize 75 × 95 × 10mm
    Cdynamic 12.7kN

    Deep groove ball bearing 61815-2RS, design 2RS1: contact seals on both sides.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet