+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €1.38 per piece.
608 · 8 × 22 × 7

Deep groove ball · 608

radial — mediumaxial — low, on both sides
    Drawing of 608: ⌀8 × ⌀22 × 7 mm608
    Fig. 1: 608, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm
    Bearing SKF 608 — photo 1
    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 608

    €1.67per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    4 exact, 0 approximate
    d
    8 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    22 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    7 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    3.45 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
    C0
    1.37 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    01

    Equivalents

    the same size 8 × 22 × 7 from other brands

    4 products
    Photo: 608
    You are viewingSKF 608
    €1.67baseline for the price comparison

    Everything the number specifies matches: ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Photo: 608608This bearingSKF8 × 22 × 7available to order€1.67you are here
    • Series illustration (not a photo of this item): 608608CT8 × 22 × 7190 pcs€0.21−€1.46
    • Series illustration (not a photo of this item): 608608DKF8 × 22 × 7out of stockon request
    • Series illustration (not a photo of this item): 608608KG8 × 22 × 7available to orderon request

    Under the price: the difference from the price of this bearing (€1.67).
    02

    Often bought with this

    seal 8×22, shaft snap ring Ø8, bore snap ring Ø22

    4 products
    • Seal 8×22JULU 008-22-7 TCWhy it fits: Oil seal 8×22: shaft 8 and housing bore 22, the same as the bearing
      €0.171,500 pcs
    • Seal 8×22JULU 008-22-8 TCWhy it fits: Oil seal 8×22: shaft 8 and housing bore 22, the same as the bearing
      €0.15available to order
    • Shaft snap ring Ø8CT SEG 8 Z by1000Why it fits: DIN 471 snap ring for a 8 shaft: holds the inner ring on the shaft
      €5.55available to order
    • Bore snap ring Ø22CT SEG 22 W by 1000Why it fits: DIN 472 snap ring for a 22 bore: holds the outer ring in the housing
      €15.65out of stock
    03

    Details

    what this bearing is, questions

    About the bearing

    D 22d 8B 7
    d×D×Bsize 8 × 22 × 7mm
    Cdynamic 3.45kN
    C0static 1.37kN

    Deep groove ball bearing 608. Under GOST the same bearing is designated 18.

    C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 18?

    It is the same bearing under GOST 3189-89: 18 corresponds to the ISO base 608. Size 8 × 22 × 7 mm, a full equivalent of 608.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet