+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
607-2RS/C3 · 7 × 19 × 6

Deep groove ball · 607 2RS C3

radial — mediumaxial — low, on both sides
    Drawing of 607 2RS C3: ⌀7 × ⌀19 × 6 mm607 2RS C32RS
    Fig. 1: 607 2RS C3, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm
    Bearing SKF 607 2RS C3 — photo 1
    Bearing SKF 607 2RS C3 — photo 2
    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 607-2RS/C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 0 approximate
    d
    7 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    19 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    6 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    C3
    C
    2.34 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    0.95 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.008 kg
    MassWeight of the product. Source: two supplier sources
    01

    Equivalents

    the same size 7 × 19 × 6 from other brands

    2 products
    Photo: 607 2RS C3
    You are viewingSKF 607-2RS/C3

    Everything the number specifies matches: ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Photo: 607 2RS C3607 2RS C3This bearingSKF7 × 19 × 6out of stockon requestyou are here
    • Photo: 607 2RS C3607 2RS C3TIMKEN7 × 19 × 6available to order€3.40
    02

    Often bought with this

    shaft snap ring Ø7, bore snap ring Ø19

    2 products
    • Shaft snap ring Ø7CT SEG 7 Z by1000Why it fits: DIN 471 snap ring for a 7 shaft: holds the inner ring on the shaft
      €5.63out of stock
    • Bore snap ring Ø19CT SEG 19 W by 1000Why it fits: DIN 472 snap ring for a 19 bore: holds the outer ring in the housing
      €10.711 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 19d 7B 6
    d×D×Bsize 7 × 19 × 6mm
    Cdynamic 2.34kN
    C0static 0.95kN
    mweight 0.008kg

    Deep groove ball bearing 607-2RS C3, design 2RS: contact seals on both sides.

    C, C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet