+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €48.86 per piece.
6019-2RS1 · 95 × 145 × 24

Deep groove ball · 6019-2RS1

radial — mediumaxial — low, on both sides
    Drawing of 6019-2RS1: ⌀95 × ⌀145 × 24 mm6019-2RS12RS1
    Fig. 1: 6019-2RS1, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6019-2RS1

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6019-2RS1

    €59.12per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    6 exact, 9 approximate
    d
    95 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    145 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    24 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RS1contact seals on both sides
    Clearance
    normal clearance
    C
    63.7 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 95 × 145 × 24 from other brands

    15 products
    Photo: 6019-2RS1
    You are viewingSKF 6019-2RS1
    €59.12baseline for the price comparison

    Everything the number specifies matches: series 60, 95 × 145 × 24 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Photo: 6019-2RS16019-2RS1This bearingSKF95 × 145 × 24available to order€59.12you are here
    • Series illustration (not a photo of this item): 6019 2RS6019 2RSCT95 × 145 × 2451 pcs€9.44−€49.68
    • Photo: 6019 2RS6019 2RSZ&S95 × 145 × 24available to order€19.01−€40.11
    • Series illustration (not a photo of this item): 6019 2RS6019 2RSno brand95 × 145 × 24available to orderon request
    • Series illustration (not a photo of this item): 6019 2RS6019 2RSDPI95 × 145 × 24out of stockon request
    • Series illustration (not a photo of this item): 6019 2RS6019 2RSKBS95 × 145 × 24out of stockon request

    Under the price: the difference from the price of this bearing (€59.12).
    02

    Often bought with this

    bore snap ring Ø145, seal 95×145

    2 products
    • Bore snap ring Ø145CT SEG 145 W by 100Why it fits: DIN 472 snap ring for a 145 bore: holds the outer ring in the housing
      €86.473 pcs
    • Seal 95×145JULU 095-145-13 TCWhy it fits: Oil seal 95×145: shaft 95 and housing bore 145, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €1.66500 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 145d 95B 24
    d×D×Bsize 95 × 145 × 24mm
    Cdynamic 63.7kN

    Deep groove ball bearing 6019-2RS, design 2RS1: contact seals on both sides. Under GOST the same bearing is designated 180119.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180119?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0119 corresponds to the ISO base 6019. Size 95 × 145 × 24 mm, a full equivalent of 6019-2RS.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet