+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6018-2Z · 90 × 140 × 24

Deep groove ball · 6018 2Z

radial — mediumaxial — low, on both sides
    Drawing of 6018 2Z: ⌀90 × ⌀140 × 24 mm6018 2Z2Z
    Fig. 1: 6018 2Z, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6018-2Z

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6018-2Z

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    5 exact, 13 approximate
    d
    90 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    140 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    24 mm
    Width BRing width. Source: supplier data
    Seal
    2Zmetal shields on both sides
    Clearance
    normal clearance
    C
    60.5 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 90 × 140 × 24 from other brands

    18 products
    Series illustration (not a photo of this item): 6018 2Z
    You are viewingSKF 6018-2Z

    Everything the number specifies matches: series 60, 90 × 140 × 24 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 6018 2Z6018 2ZThis bearingSKF90 × 140 × 24available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6018 ZZ6018 ZZCT90 × 140 × 2450 pcs€9.47
    • Series illustration (not a photo of this item): 6018 ZZ6018 ZZNTE90 × 140 × 242 pcs€10.35
    • Series illustration (not a photo of this item): 6018 ZZ6018 ZZno brand90 × 140 × 24available to orderon request
    • Series illustration (not a photo of this item): 6018 ZZ6018 ZZKG90 × 140 × 24available to orderon request
    02

    Often bought with this

    seal 90×140

    2 products
    • Seal 90×140090-140-13 TCWhy it fits: Oil seal 90×140: shaft 90 and housing bore 140, the same as the bearing; the bearing has its own seals (2Z), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    • Seal 90×140JULU 090-140-13 TCWhy it fits: Oil seal 90×140: shaft 90 and housing bore 140, the same as the bearing; the bearing has its own seals (2Z), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 140d 90B 24
    d×D×Bsize 90 × 140 × 24mm
    Cdynamic 60.5kN

    Deep groove ball bearing 6018-ZZ, design 2Z: metal shields on both sides. Under GOST the same bearing is designated 80118.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 80118?

    It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0118 corresponds to the ISO base 6018. Size 90 × 140 × 24 mm, a full equivalent of 6018-ZZ.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet