+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €46.14 per piece.
6018-2RS1/C3 · 90 × 140 × 24

Deep groove ball · 6018 2RS1/C3

radial — mediumaxial — low, on both sides
    Drawing of 6018 2RS1/C3: ⌀90 × ⌀140 × 24 mm6018 2RS1/C32RS1
    Fig. 1: 6018 2RS1/C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6018-2RS1/C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6018-2RS1/C3

    €55.83per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 17 approximate
    d
    90 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    140 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    24 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RS1contact seals on both sides
    Clearance
    C3
    C
    60.5 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 90 × 140 × 24 from other brands

    18 products
    Photo: 6018 2RS1/C3
    You are viewingSKF 6018-2RS1/C3
    €55.83baseline for the price comparison

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 60186018open, no protection, normal clearanceCT90 × 140 × 2484 pcs€5.61−€50.22
    • Photo: 60186018open, no protection, normal clearanceFLT90 × 140 × 24available to order€27.48−€28.35
    • Photo: 60186018open, no protection, normal clearanceSKF90 × 140 × 24available to order€57.41+€1.58
    • Series illustration (not a photo of this item): 60186018open, no protection, normal clearanceDYZV90 × 140 × 24available to orderon request
    • Drawing: 6018 M C46018 M C4open, no protection, clearance C4, MFAG90 × 140 × 24available to orderon request
    • Series illustration (not a photo of this item): 60186018open, no protection, normal clearanceKG90 × 140 × 24available to orderon request
    • Drawing: 6018CM 56018CM 5open, no protection, clearance CM, 5NSK90 × 140 × 24available to orderon request
    • Series illustration (not a photo of this item): 6018 ZZ6018 ZZmetal shields on both sides, normal clearanceCT90 × 140 × 2450 pcs€9.47−€46.36
    • Series illustration (not a photo of this item): 6018 ZZ6018 ZZmetal shields on both sides, normal clearanceNTE90 × 140 × 242 pcs€10.35−€45.48
    • Series illustration (not a photo of this item): 6018 ZZ6018 ZZmetal shields on both sides, normal clearanceno brand90 × 140 × 24available to orderon request

    Under the price: the difference from the price of this bearing (€55.83).
    02

    Often bought with this

    seal 90×140

    2 products
    • Seal 90×140090-140-13 TCWhy it fits: Oil seal 90×140: shaft 90 and housing bore 140, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    • Seal 90×140JULU 090-140-13 TCWhy it fits: Oil seal 90×140: shaft 90 and housing bore 140, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 140d 90B 24
    d×D×Bsize 90 × 140 × 24mm
    Cdynamic 60.5kN

    Deep groove ball bearing 6018-2RS C3, design 2RS1: contact seals on both sides.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet