+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6015-2Z/C3 · 75 × 115 × 20

Deep groove ball · 6015-2Z/C3

radial — mediumaxial — low, on both sides
    Drawing of 6015-2Z/C3: ⌀75 × ⌀115 × 20 mm6015-2Z/C32Z
    Fig. 1: 6015-2Z/C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6015-2Z/C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6015-2Z/C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 24 approximate
    d
    75 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    115 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    20 mm
    Width BRing width. Source: supplier data
    Seal
    2Zmetal shields on both sides
    Clearance
    C3
    01

    Equivalents

    the same size 75 × 115 × 20 from other brands

    26 products
    Series illustration (not a photo of this item): 6015-2Z/C3
    You are viewingSKF 6015-2Z/C3

    Everything the number specifies matches: series 60, 75 × 115 × 20 mm, metal shields on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 6015-2Z/C36015-2Z/C3This bearingSKF75 × 115 × 20available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6015 2Z C36015 2Z C3FAG75 × 115 × 20available to orderon request
    02

    Often bought with this

    bore snap ring Ø115, seal 75×115

    2 products
    • Bore snap ring Ø115CT SEG 115 W by 100Why it fits: DIN 472 snap ring for a 115 bore: holds the outer ring in the housing
      €61.771 pcs
    • Seal 75×115JULU 075-115-10 TCWhy it fits: Oil seal 75×115: shaft 75 and housing bore 115, the same as the bearing; the bearing has its own seals (2Z), and the oil seal closes the unit from outside
      €1.08109 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    12 machines2 makesby parts catalogues

    1. T-150-05-09-25, KhTZ-181 KhTZ same geometry 3 assemblies · 8 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractors T-150-05-09-25 and KhTZ-181. Operator’s manual

    2. KhTZ-16131, KhTZ-16331 KhTZ same geometry 2 assemblies · 8 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractors KhTZ-16131, KhTZ-16331. Operator’s manual 161.00.000 RE

    3. KhTZ-17021, KhTZ-17221 KhTZ same geometry 2 assemblies · 8 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; ours has clearance C3; the machine takes normal (CN); the machine has snap ring groove (N); ours does not

      manufacturer’s catalogue: Tractors KhTZ-17021 and KhTZ-17221. Operator’s manual 170.00.000 RE

    4. KhTZ-242K.20 KhTZ same geometry 2 assemblies · 8 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; ours has clearance C3; the machine takes normal (CN); the machine has snap ring groove (N); ours does not

      manufacturer’s catalogue: Tractor KhTZ-242K.20. Operator’s manual

    5. KhTZ-243K.20 KhTZ same geometry 2 assemblies · 8 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; ours has clearance C3; the machine takes normal (CN); the machine has snap ring groove (N); ours does not

      manufacturer’s catalogue: Tractor KhTZ-243K.20. Operator’s manual

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 115d 75B 20
    d×D×Bsize 75 × 115 × 20mm

    Deep groove ball bearing 6015-ZZ C3, design 2Z: metal shields on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet