+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6013-2Z · 65 × 100 × 18

Deep groove ball · 6013-2Z

radial — mediumaxial — low, on both sides
    Drawing of 6013-2Z: ⌀65 × ⌀100 × 18 mm6013-2Z2Z
    Fig. 1: 6013-2Z, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6013-2Z

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6013-2Z

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    4 exact, 18 approximate
    d
    65 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    100 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    18 mm
    Width BRing width. Source: supplier data
    Seal
    2Zmetal shields on both sides
    Clearance
    normal clearance
    C
    31.9 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 65 × 100 × 18 from other brands

    22 products
    Series illustration (not a photo of this item): 6013-2Z
    You are viewingSKF 6013-2Z

    Everything the number specifies matches: series 60, 65 × 100 × 18 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 6013-2Z6013-2ZThis bearingSKF65 × 100 × 18available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6013 ZZ6013 ZZCT65 × 100 × 18378 pcs€2.54
    • Photo: 6013 ZZ6013 ZZZ&S65 × 100 × 18available to order€7.43
    • Series illustration (not a photo of this item): 6013 ZZ6013 ZZNTE65 × 100 × 18available to orderon request
    02

    Often bought with this

    shaft snap ring Ø65, bore snap ring Ø100, seal 65×100

    5 products
    • Shaft snap ring Ø65CT SEG 65 Z by1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      €177.91available to order
    • Shaft snap ring Ø65SEG 65 Z by 1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø100CT SEG 100 W by 100Why it fits: DIN 472 snap ring for a 100 bore: holds the outer ring in the housing
      €28.8214 pcs
    • Seal 65×100JULU 065-100-10 TCWhy it fits: Oil seal 65×100: shaft 65 and housing bore 100, the same as the bearing; the bearing has its own seals (2Z), and the oil seal closes the unit from outside
      €0.93590 pcs
    • Seal 65×100XPS 65x100x10Why it fits: Oil seal 65×100: shaft 65 and housing bore 100, the same as the bearing; the bearing has its own seals (2Z), and the oil seal closes the unit from outside
      €2.94available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus check the version 1 assembly · 2 pcs per machine

      not set by the number: sealing

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by GOST (80113) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 100d 65B 18
    d×D×Bsize 65 × 100 × 18mm
    Cdynamic 31.9kN

    Deep groove ball bearing 6013-ZZ, design 2Z: metal shields on both sides. Under GOST the same bearing is designated 80113.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 80113?

    It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0113 corresponds to the ISO base 6013. Size 65 × 100 × 18 mm, a full equivalent of 6013-ZZ.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet