+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €19.07 per piece.
6013-2RS1 · 65 × 100 × 18

Deep groove ball · 6013-2RS1

radial — mediumaxial — low, on both sides
    Drawing of 6013-2RS1: ⌀65 × ⌀100 × 18 mm6013-2RS12RS1
    Fig. 1: 6013-2RS1, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6013-2RS1

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6013-2RS1

    €23.07per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    9 exact, 13 approximate
    d
    65 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    100 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    18 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RS1contact seals on both sides
    Clearance
    normal clearance
    C
    31.9 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
    C0
    25 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.451 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 65 × 100 × 18 from other brands

    22 products
    Series illustration (not a photo of this item): 6013-2RS1
    You are viewingSKF 6013-2RS1
    €23.07baseline for the price comparison

    Everything the number specifies matches: series 60, 65 × 100 × 18 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 6013-2RS16013-2RS1This bearingSKF65 × 100 × 18available to order€23.07you are here
    • Series illustration (not a photo of this item): 6013 2RS6013 2RSCT65 × 100 × 18567 pcs€2.98−€20.09
    • Series illustration (not a photo of this item): 6013 2RS6013 2RSNTE65 × 100 × 1840 pcs€4.14−€18.93
    • Photo: 6013 2RS6013 2RSZ&S65 × 100 × 18available to order€7.61−€15.46
    • Photo: 6013 2RS6013 2RSTIMKEN65 × 100 × 18available to order€34.85+€11.78
    • Series illustration (not a photo of this item): 6013 2RS6013 2RSno brand65 × 100 × 18available to orderon request
    • Series illustration (not a photo of this item): 6013 2RS6013 2RSISB65 × 100 × 18available to orderon request
    • Series illustration (not a photo of this item): 6013 2RS6013 2RSKG65 × 100 × 18available to orderon request
    • Series illustration (not a photo of this item): 6013 2NSE6013 2NSENACHI65 × 100 × 18available to orderon request

    Under the price: the difference from the price of this bearing (€23.07).
    02

    Often bought with this

    shaft snap ring Ø65, bore snap ring Ø100, seal 65×100

    5 products
    • Shaft snap ring Ø65CT SEG 65 Z by1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      €177.91available to order
    • Shaft snap ring Ø65SEG 65 Z by 1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø100CT SEG 100 W by 100Why it fits: DIN 472 snap ring for a 100 bore: holds the outer ring in the housing
      €28.8214 pcs
    • Seal 65×100JULU 065-100-10 TCWhy it fits: Oil seal 65×100: shaft 65 and housing bore 100, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.93590 pcs
    • Seal 65×100XPS 65x100x10Why it fits: Oil seal 65×100: shaft 65 and housing bore 100, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €2.94available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus check the version 1 assembly · 2 pcs per machine

      not set by the number: sealing

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by GOST (180113) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 100d 65B 18
    d×D×Bsize 65 × 100 × 18mm
    Cdynamic 31.9kN
    C0static 25kN
    mweight 0.451kg

    Deep groove ball bearing 6013-2RS, design 2RS1: contact seals on both sides. Under GOST the same bearing is designated 180113.

    C, C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180113?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0113 corresponds to the ISO base 6013. Size 65 × 100 × 18 mm, a full equivalent of 6013-2RS.

    Will 6013 2RS1 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet