+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €15.36 per piece.
6012-2RS1/C3 · 60 × 95 × 18

Deep groove ball · 6012-2RS1/C3

radial — mediumaxial — low, on both sides
    Drawing of 6012-2RS1/C3: ⌀60 × ⌀95 × 18 mm6012-2RS1/C32RS1
    Fig. 1: 6012-2RS1/C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6012-2RS1/C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6012-2RS1/C3

    €18.59per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    3 exact, 28 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    95 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    18 mm
    Width BRing width. Source: supplier data
    Seal
    2RS1contact seals on both sides
    Clearance
    C3
    C
    30.7 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 60 × 95 × 18 from other brands

    31 products
    Photo: 6012-2RS1/C3
    You are viewingSKF 6012-2RS1/C3
    €18.59baseline for the price comparison

    Everything the number specifies matches: series 60, 60 × 95 × 18 mm, contact seals on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Photo: 6012-2RS1/C36012-2RS1/C3This bearingSKF60 × 95 × 18available to order€18.59you are here
    • Photo: 6012 2RS C36012 2RS C3Z&S60 × 95 × 18available to order€6.99−€11.60
    • Series illustration (not a photo of this item): 6012 2RSC36012 2RSC3KG60 × 95 × 18available to orderon request

    Under the price: the difference from the price of this bearing (€18.59).
    02

    Often bought with this

    shaft snap ring Ø60, bore snap ring Ø95, seal 60×95

    4 products
    • Shaft snap ring Ø60CT SEG 60 Z by1000Why it fits: DIN 471 snap ring for a 60 shaft: holds the inner ring on the shaft
      €132.24out of stock
    • Bore snap ring Ø95CT-RING SEG 95 W by 100Why it fits: DIN 472 snap ring for a 95 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 60×95JULU 060-95-10 TCWhy it fits: Oil seal 60×95: shaft 60 and housing bore 95, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.71385 pcs
    • Seal 60×95NQK 60x95x10Why it fits: Oil seal 60×95: shaft 60 and housing bore 95, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €1.98out of stock
    03

    Details

    what this bearing is, questions

    About the bearing

    D 95d 60B 18
    d×D×Bsize 60 × 95 × 18mm
    Cdynamic 30.7kN

    Deep groove ball bearing 6012-2RS C3, design 2RS1: contact seals on both sides.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet