+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6010-ZZ/C3 · 50 × 80 × 16

Deep groove ball · 6010 ZZ C3

radial — mediumaxial — low, on both sides
    Drawing of 6010 ZZ C3: ⌀50 × ⌀80 × 16 mm6010 ZZ C3ZZ
    Fig. 1: 6010 ZZ C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6010-ZZ/C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6010-ZZ/C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    3 exact, 31 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    16 mm
    Width BRing width. Source: two supplier sources
    Seal
    ZZshields, both sides
    Clearance
    C3
    m
    0.26 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 50 × 80 × 16 from other brands

    34 products
    Series illustration (not a photo of this item): 6010 ZZ C3
    You are viewingSKF 6010-ZZ/C3

    Everything the number specifies matches: series 60, 50 × 80 × 16 mm, metal shields on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 6010 ZZ C36010 ZZ C3This bearingSKF50 × 80 × 16out of stockon requestyou are here
    • Series illustration (not a photo of this item): 6010ZZE C36010ZZE C3NACHI50 × 80 × 16available to orderon request
    • Series illustration (not a photo of this item): 6010-2Z/C36010-2Z/C3SKF50 × 80 × 16available to orderon request
    02

    Often bought with this

    shaft snap ring Ø50, bore snap ring Ø80, seal 50×80

    6 products
    • Shaft snap ring Ø50CT SEG 50 Z by 1000Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      €115.29available to order
    • Shaft snap ring Ø50SEG 50 Z (100 pcs)Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 50×80JULU 050-80-10 TCWhy it fits: Oil seal 50×80: shaft 50 and housing bore 80, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.541,000 pcs
    • Seal 50×80JULU 050-80-8 TCWhy it fits: Oil seal 50×80: shaft 50 and housing bore 80, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.54700 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    3 machines2 makesby parts catalogues

    1. Belarus-152 Belarus same geometry 3 assemblies · 5 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    2. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus same geometry 1 assembly · 2 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    3. KhTZ-2511, KhTZ-3510 KhTZ same geometry 1 assembly · 2 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 80d 50B 16
    d×D×Bsize 50 × 80 × 16mm
    mweight 0.26kg

    Deep groove ball bearing 6010-ZZ C3, design ZZ: metal shields on both sides.

    M: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet