+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €9.06 per piece.
6009-2RS1/C3 · 45 × 75 × 16

Deep groove ball · 6009-2RS1/C3

radial — mediumaxial — low, on both sides
    Drawing of 6009-2RS1/C3: ⌀45 × ⌀75 × 16 mm6009-2RS1/C32RS1
    Fig. 1: 6009-2RS1/C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6009-2RS1/C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6009-2RS1/C3

    €10.96per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    4 exact, 44 approximate
    d
    45 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    75 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    16 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RS1contact seals on both sides
    Clearance
    C3
    C
    22.1 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
    C0
    14.6 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.25 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 45 × 75 × 16 from other brands

    48 products
    Series illustration (not a photo of this item): 6009-2RS1/C3
    You are viewingSKF 6009-2RS1/C3
    €10.96baseline for the price comparison

    Everything the number specifies matches: series 60, 45 × 75 × 16 mm, contact seals on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 6009-2RS1/C36009-2RS1/C3This bearingSKF45 × 75 × 16available to order€10.96you are here
    • Photo: 6009 2RSR C36009 2RSR C3FAG45 × 75 × 16270 pcs€8.30−€2.66
    • Series illustration (not a photo of this item): 6009 2RSC36009 2RSC3KG45 × 75 × 16available to orderon request
    • Series illustration (not a photo of this item): 6009 2RSC36009 2RSC3NTE45 × 75 × 16available to orderon request

    Under the price: the difference from the price of this bearing (€10.96).
    02

    Often bought with this

    shaft snap ring Ø45, bore snap ring Ø75, seal 45×75

    4 products
    • Shaft snap ring Ø45CT SEG 45 Z by 1000Why it fits: DIN 471 snap ring for a 45 shaft: holds the inner ring on the shaft
      €77.63available to order
    • Bore snap ring Ø75CT SEG 75 W by 100Why it fits: DIN 472 snap ring for a 75 bore: holds the outer ring in the housing
      €19.77available to order
    • Seal 45×75JULU 045-75-10 TCWhy it fits: Oil seal 45×75: shaft 45 and housing bore 75, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.50480 pcs
    • Seal 45×75JULU 045-75-8 TCWhy it fits: Oil seal 45×75: shaft 45 and housing bore 75, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.57available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    9 machines3 makesby parts catalogues

    1. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus same geometry 1 assembly · 2 pcs per machine

      ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. KhTZ-17021, KhTZ-17221 KhTZ same geometry 1 assembly · 1 pcs per machine

      the machine has S17; ours does not; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractors KhTZ-17021 and KhTZ-17221. Operator’s manual 170.00.000 RE

    3. KhTZ-242K.20 KhTZ same geometry 1 assembly · 1 pcs per machine

      ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractor KhTZ-242K.20. Operator’s manual

    4. KhTZ-243K.20 KhTZ same geometry 1 assembly · 1 pcs per machine

      the machine has S17; ours does not; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractor KhTZ-243K.20. Operator’s manual

    5. T-150-05-09-25, KhTZ-181 KhTZ same geometry 1 assembly · 1 pcs per machine

      ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractors T-150-05-09-25 and KhTZ-181. Operator’s manual

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 75d 45B 16
    d×D×Bsize 45 × 75 × 16mm
    Cdynamic 22.1kN
    C0static 14.6kN
    mweight 0.25kg

    Deep groove ball bearing 6009-2RS C3, design 2RS1: contact seals on both sides.

    C, C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet