+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €8.22 per piece.
6007-Z · 35 × 62 × 14

Deep groove ball · 6007 Z

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 6007 Z: ⌀35 × ⌀62 × 14 mm⌀62⌀35146007 ZZ
    Fig. 1: 6007 Z, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6007-Z

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6007-Z

    €9.95per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    2 exact, 52 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    14 mm
    Width BRing width. Source: two supplier sources
    Seal
    Zshield, one side
    Clearance
    normal clearance
    C
    16.8 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    10.2 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    01

    Equivalents

    the same size 35 × 62 × 14 from other brands

    55 products
    Photo: 6007 Z
    You are viewingSKF 6007-Z
    €9.95baseline for the price comparison

    Everything the number specifies matches: series 60, 35 × 62 × 14 mm, shield on one side, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Photo: 6007 Z6007 ZThis bearingSKF35 × 62 × 14available to order€9.95you are here
    • Cross-section drawing to size: Deep groove ball, 35 × 62 × 14 mm6007 ZNZVL35 × 62 × 14available to orderon request

    Under the price: the difference from the price of this bearing (€9.95).
    02

    Often bought with this

    shaft snap ring Ø35, bore snap ring Ø62, seal 35×62

    5 products
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    • Seal 35×62JULU 035-62-10 TCWhy it fits: Oil seal 35×62: shaft 35 and housing bore 62, the same as the bearing; the bearing has its own seals (Z), and the oil seal closes the unit from outside
      €0.3918,510 pcs
    • Seal 35×62JULU 035-62-7 TCWhy it fits: Oil seal 35×62: shaft 35 and housing bore 62, the same as the bearing; the bearing has its own seals (Z), and the oil seal closes the unit from outside
      €0.441,561 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 62d 35B 14
    d×D×Bsize 35 × 62 × 14mm
    Cdynamic 16.8kN
    C0static 10.2kN

    Deep groove ball bearing 6007-Z, design Z: shield on one side. Under GOST the same bearing is designated 60107.

    C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 60107?

    It is the same bearing under GOST 3189-89: 6 — shield on one side, 0107 corresponds to the ISO base 6007. Size 35 × 62 × 14 mm, a full equivalent of 6007-Z.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet