+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €3.32 per piece.
6006 · 30 × 55 × 13

Deep groove ball · 6006

radial — mediumaxial — low, on both sides
    Drawing of 6006: ⌀30 × ⌀55 × 13 mm6006
    Fig. 1: 6006, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6006

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6006

    €4.02per piece incl. VAT
    In stock: 80 pcs
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    5 exact, 53 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    55 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    13 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 30 × 55 × 13 from other brands

    59 products
    Photo: 6006
    You are viewingSKF 6006
    €4.02baseline for the price comparison

    Everything the number specifies matches: series 60, 30 × 55 × 13 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Photo: 60066006This bearingSKF30 × 55 × 1380 pcs€4.02you are here
    • Series illustration (not a photo of this item): 60066006CT30 × 55 × 1333 pcs€0.90−€3.12
    • Photo: 60066006Z&S30 × 55 × 13available to order€1.69−€2.33
    • Series illustration (not a photo of this item): 60066006no brand30 × 55 × 13available to orderon request
    • Series illustration (not a photo of this item): 60066006KG30 × 55 × 13available to orderon request

    Under the price: the difference from the price of this bearing (€4.02).
    02

    Often bought with this

    seal 30×55, shaft snap ring Ø30, bore snap ring Ø55

    5 products
    • Seal 30×55JULU 030-55-10 TCWhy it fits: Oil seal 30×55: shaft 30 and housing bore 55, the same as the bearing
      €0.39870 pcs
    • Seal 30×55JULU 030-55-7 TCWhy it fits: Oil seal 30×55: shaft 30 and housing bore 55, the same as the bearing
      €0.40180 pcs
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø55CT SEG 55 W by 1000Why it fits: DIN 472 snap ring for a 55 bore: holds the outer ring in the housing
      €90.59available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. Belarus-152 Belarus exactly this number 4 assemblies · 5 pcs per machine

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    Number in the manufacturer’s catalogue: by GOST (106) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 55d 30B 13
    d×D×Bsize 30 × 55 × 13mm

    Deep groove ball bearing 6006. Under GOST the same bearing is designated 106.

    Frequently asked questions

    What is 106?

    It is the same bearing under GOST 3189-89: 106 corresponds to the ISO base 6006. Size 30 × 55 × 13 mm, a full equivalent of 6006.

    Will 6006 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet