+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6004-2ZNR · 20 × 42 × 12

Deep groove ball · 6004-2ZNR

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 6004-2ZNR: ⌀20 × ⌀42 × 12 mm⌀42⌀20126004-2ZNR2Z
    Fig. 1: 6004-2ZNR, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6004-2ZNR

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6004-2ZNR

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    2 exact, 62 approximate
    d
    20 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    42 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    12 mm
    Width BRing width. Source: supplier data
    Seal
    2Zmetal shields on both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 20 × 42 × 12 from other brands

    64 products
    Cross-section drawing to size: Deep groove ball, 20 × 42 × 12 mm
    You are viewingSKF 6004-2ZNR

    Everything the number specifies matches: series 60, 20 × 42 × 12 mm, metal shields on both sides, NR, normal clearance, special design. The codes in the number are read against the SKF catalogue.

    • Cross-section drawing to size: Deep groove ball, 20 × 42 × 12 mm6004-2ZNRThis bearingSKF20 × 42 × 12available to orderon requestyou are here
    • Cross-section drawing to size: Deep groove ball, 20 × 42 × 12 mm6004 ZZ NRNSK20 × 42 × 12available to orderon request
    02

    Often bought with this

    shaft snap ring Ø20, bore snap ring Ø42, seal 20×42

    5 products
    • Shaft snap ring Ø20CT SEG 20 Z by 1000Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      €22.57available to order
    • Shaft snap ring Ø20SEG 20 Z (100 pcs)Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø42CT SEG 42 W by 1000Why it fits: DIN 472 snap ring for a 42 bore: holds the outer ring in the housing
      €45.155 pcs
    • Seal 20×42JULU 020-42-7 TCWhy it fits: Oil seal 20×42: shaft 20 and housing bore 42, the same as the bearing; the bearing has its own seals (2Z), and the oil seal closes the unit from outside
      €0.25300 pcs
    • Seal 20×42JULU 020-42-10 TCWhy it fits: Oil seal 20×42: shaft 20 and housing bore 42, the same as the bearing; the bearing has its own seals (2Z), and the oil seal closes the unit from outside
      €0.28560 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    2 machines1 makeby parts catalogues

    1. Gaspardo Nina 250/​300/​400 (mechanical seed drill) Maschio Gaspardo same geometry 3 assemblies

      ours: shields on both sides (ZZ); in the machine: seals on both sides (2RS); ours has groove and snap ring (NR)

      manufacturer’s catalogue: maschio_nina-2015

    2. Gaspardo Primavera (pneumatic seed drill) Maschio Gaspardo same geometry 3 assemblies

      ours: shields on both sides (ZZ); in the machine: seals on both sides (2RS); ours has groove and snap ring (NR)

      manufacturer’s catalogue: maschio_primavera-2009

    Number in the manufacturer’s catalogue: by GOST (80104) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 42d 20B 12
    d×D×Bsize 20 × 42 × 12mm

    Deep groove ball bearing 6004-ZZ, design 2Z: metal shields on both sides. Under GOST the same bearing is designated 80104.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 80104?

    It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0104 corresponds to the ISO base 6004. Size 20 × 42 × 12 mm, a full equivalent of 6004-ZZ.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet