+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
4210 ATN9 · 50 × 90

Deep groove ball · 4210 ATN9 · simplified: bore (cylindrical or K), not given in the designation; width not specified

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 4210 ATN9: ⌀50 × ⌀90 mm⌀90⌀504210 ATN9
    Fig. 1: 4210 ATN9, simplified drawing per ISO 8826-1; width not specified — outline drawn to the proportions of the type. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 4210 ATN9

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 4210 ATN9

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 8 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    90 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    C
    41 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 50 × 90 from other brands

    13 products
    Type diagram, no dimensions: bearing
    You are viewingSKF 4210 ATN9

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 62210 2RS62210 2RSstandard designCT50 × 90 × 2319 pcs€3.84
    • Cross-section drawing to size: Deep groove ball, 50 × 90 × 23 mm62210 A 2RSRA: not decodedFAG50 × 90 × 2330 pcs€35.13
    • Photo: 62210 2RS62210 2RSstandard designZ&S50 × 90 × 23available to order€6.86
    • Series illustration (not a photo of this item): 62210 2RS62210 2RSstandard designno brand50 × 90 × 23available to orderon request
    • Series illustration (not a photo of this item): 62210 2RS62210 2RSstandard designKG50 × 90 × 23available to orderon request
    • Cross-section drawing to size: Deep groove ball, 50 × 90 × 23 mm9008745700958 62210-2RSR700958, 62210: not decodedNKE50 × 90 × 23available to orderon request
    • Series illustration (not a photo of this item): 62210 2RS62210 2RSstandard designNTE50 × 90 × 23available to orderon request
    • Series illustration (not a photo of this item): 62210-2RS162210-2RS1standard designSKF50 × 90 × 23available to orderon request
    02

    Often bought with this

    seal 50×90, shaft snap ring Ø50, bore snap ring Ø90

    5 products
    • Seal 50×90JULU 050-90-10 TCWhy it fits: Oil seal 50×90: shaft 50 and housing bore 90, the same as the bearing
      €0.73280 pcs
    • Shaft snap ring Ø50CT SEG 50 Z by 1000Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      €115.29available to order
    • Shaft snap ring Ø50SEG 50 Z (100 pcs)Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø90CT SEG 90 W by 100Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      €23.89available to order
    • Bore snap ring Ø90SEG 90 W by 1000Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 50 × 90mm
    Cdynamic 41kN

    Deep groove ball bearing 4210 ATN9.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet