+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
4206 ATN9 · 30 × 62 × 20

Deep groove ball · 4206 ATN9 · simplified: bore (cylindrical or K), not given in the designation

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 4206 ATN9: ⌀30 × ⌀62 × 20 mm⌀62⌀30204206 ATN9
    Fig. 1: 4206 ATN9, simplified drawing per ISO 8826-1. Dimensions in mm
    Bearing SKF 4206 ATN9 — photo 1
    Bearing SKF 4206 ATN9 — photo 2
    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 4206 ATN9

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 9 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    20 mm
    Width BRing width. Source: two supplier sources
    C
    26 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
    C0
    20.8 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
    01

    Equivalents

    the same size 30 × 62 × 20 from other brands

    17 products
    Photo: 4206 ATN9
    You are viewingSKF 4206 ATN9

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 62206 2RS62206 2RSstandard designCT30 × 62 × 2060 pcs€1.56
    • Series illustration (not a photo of this item): 62206 2RS62206 2RSstandard designNTE30 × 62 × 2086 pcs€2.58
    • Photo: 62206 2RS62206 2RSstandard designZ&S30 × 62 × 20available to order€3.80
    • Series illustration (not a photo of this item): 62206-2RS162206-2RS1standard designSKF30 × 62 × 20available to order€18.36
    • Series illustration (not a photo of this item): 62206 2RS62206 2RSstandard designno brand30 × 62 × 20available to orderon request
    • Series illustration (not a photo of this item): 62206 2RS62206 2RSstandard designKG30 × 62 × 20available to orderon request
    • Cross-section drawing to size: Deep groove ball, 30 × 62 × 20 mm9008745179099 62206-2RSR179099, 62206: not decodedNKE30 × 62 × 20available to orderon request
    • Cross-section drawing to size: Deep groove ball, 30 × 62 × 20 mm180506 (62206 2RS) PQPQ: not decodedNTE30 × 62 × 20available to orderon request
    • Cross-section drawing to size: Deep groove ball, 30 × 62 × 20 mm62206.EEEE: not decodedNTN/SNR30 × 62 × 20available to orderon request
    02

    Often bought with this

    seal 30×62, shaft snap ring Ø30, bore snap ring Ø62

    5 products
    • Seal 30×62JULU 030-62-7 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing
      €0.39480 pcs
    • Seal 30×62JULU 030-62-10 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing
      €0.401,764 pcs
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 62d 30B 20
    d×D×Bsize 30 × 62 × 20mm
    Cdynamic 26kN
    C0static 20.8kN

    Deep groove ball bearing 4206 ATN9.

    C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet