+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
3314 A · 70 × 150 × 63.5

Angular contact ball · 3314 A

at an angle — medium, on both sides
    Drawing of 3314 A: ⌀70 × ⌀150 × 63.5 mm⌀150⌀7063.53314 A
    Fig. 1: 3314 A, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 3314 A

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing SKF 3314 A

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 2 approximate
    d
    70 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    150 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    63.5 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    C
    163 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 70 × 150 × 63.5 from other brands

    3 products
    Series illustration (not a photo of this item): 3314 A
    You are viewingSKF 3314 A

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 3314 C33314 C3clearance C3, standard designFAG70 × 150 × 63.5available to orderon request
    • Series illustration (not a photo of this item): 3314 A/C33314 A/C3clearance C3SKF70 × 150 × 63.5available to orderon request
    02

    Often bought with this

    shaft snap ring Ø70, bore snap ring Ø150

    2 products
    • Shaft snap ring Ø70CT SEG 70 Z by1000Why it fits: DIN 471 snap ring for a 70 shaft: holds the inner ring on the shaft
      €209.55out of stock
    • Bore snap ring Ø150CT SEG 150 W by 100Why it fits: DIN 472 snap ring for a 150 bore: holds the outer ring in the housing
      €86.47available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 150d 70B 63.5
    d×D×Bsize 70 × 150 × 63.5mm
    Cdynamic 163kN

    Angular contact ball bearing 3314 A.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 3314 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet