+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
3312 A · 60 × 130 × 54

Angular contact ball · 3312 A

at an angle — medium, on both sides
    Drawing of 3312 A: ⌀60 × ⌀130 × 54 mm⌀130⌀60543312 A
    Fig. 1: 3312 A, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 3312 A

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing SKF 3312 A

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 6 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    130 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    54 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    C
    127 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 60 × 130 × 54 from other brands

    7 products
    Series illustration (not a photo of this item): 3312 A
    You are viewingSKF 3312 A

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 3312B-2RSRTNG3312B-2RSRTNGcontact seals on both sides, B, TNGNEUWEG60 × 130 × 54available to orderon request
    • Type diagram, no dimensions: ball3312B-2RSRTNG N AR3N5contact seals on both sides, 5, A, B, TNG, groove for a snap ring, R3: not decodedNSK60 × 130 × ?available to orderon request
    • Series illustration (not a photo of this item): 3312 B 2ZRTNG C33312 B 2ZRTNG C3metal shields on both sides, clearance C3, B, TNGNSK60 × 130 × 54available to orderon request
    • Series illustration (not a photo of this item): 3312 A-2Z/C3MT333312 A-2Z/C3MT33metal shields on both sides, clearance C3, A, MT33SKF60 × 130 × 54available to orderon request
    • Photo: 33123312standard designNEU60 × 130 × 54out of stockon request
    • Series illustration (not a photo of this item): 3312 AJC33312 AJC3clearance C3, J: not decodedTIMKEN60 × 130 × ?available to orderon request
    02

    Often bought with this

    shaft snap ring Ø60

    1 product
    • Shaft snap ring Ø60CT SEG 60 Z by1000Why it fits: DIN 471 snap ring for a 60 shaft: holds the inner ring on the shaft
      €132.24out of stock
    03

    Details

    what this bearing is, questions

    About the bearing

    D 130d 60B 54
    d×D×Bsize 60 × 130 × 54mm
    Cdynamic 127kN

    Angular contact ball bearing 3312 A.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 3312 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet