+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
3309 A-2RS1/MT33 · 45 × 100 × 39.7

Angular contact ball · 3309 A-2RS1/MT33

at an angle — medium, on both sides
    Drawing of 3309 A-2RS1/MT33: ⌀45 × ⌀100 × 39.7 mm⌀100⌀4539.73309 A-2RS1/MT332RS1
    Fig. 1: 3309 A-2RS1/MT33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 3309 A-2RS1/MT33

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing SKF 3309 A-2RS1/MT33

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 8 approximate
    d
    45 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    100 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    39.7 mm
    Width BRing width. Source: supplier data
    Seal
    2RS1contact seals on both sides
    C
    75 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 45 × 100 × 39.7 from other brands

    9 products
    Series illustration (not a photo of this item): 3309 A-2RS1/MT33
    You are viewingSKF 3309 A-2RS1/MT33

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 3309 2RS3309 2RSstandard designCT45 × 100 × 39.720 pcs€9.04
    • Series illustration (not a photo of this item): 3309 BD-XL-2HRS-TVH-C33309 BD-XL-2HRS-TVH-C3clearance C3, TVH, XL, BD: not decodedFAG45 × 100 × ?available to orderon request
    • Series illustration (not a photo of this item): 3309B-2RSRTNGC33309B-2RSRTNGC3clearance C3, B, TNGNEUWEG45 × 100 × 39.7available to orderon request
    • Type diagram, no dimensions: ball3309B-2RSRTNGC3 N AR3N5clearance C3, 5, A, B, TNG, groove for a snap ring, R3: not decodedNSK45 × 100 × ?available to orderon request
    • Photo: 3309 2RS3309 2RSstandard designZ&S45 × 100 × 39.7out of stockon request
    • Series illustration (not a photo of this item): 3309J N 53309J N 5open, no protection, 5, J, groove for a snap ringNSK45 × 100 × 39.7available to orderon request
    • Series illustration (not a photo of this item): 3309 A3309 Aopen, no protection, ASKF45 × 100 × 39.7available to orderon request
    • Series illustration (not a photo of this item): 3309 A/C33309 A/C3open, no protection, clearance C3, ASKF45 × 100 × 39.7available to orderon request
    02

    Often bought with this

    shaft snap ring Ø45, bore snap ring Ø100, seal 45×100

    3 products
    • Shaft snap ring Ø45CT SEG 45 Z by 1000Why it fits: DIN 471 snap ring for a 45 shaft: holds the inner ring on the shaft
      €77.63available to order
    • Bore snap ring Ø100CT SEG 100 W by 100Why it fits: DIN 472 snap ring for a 100 bore: holds the outer ring in the housing
      €28.8214 pcs
    • Seal 45×100JULU 045-100-10 TCWhy it fits: Oil seal 45×100: shaft 45 and housing bore 100, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.93available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 100d 45B 39.7
    d×D×Bsize 45 × 100 × 39.7mm
    Cdynamic 75kN

    Angular contact ball bearing 3309 A-2RS, design 2RS1: contact seals on both sides.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet