+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €48.32 per piece.
3307 ATN9 · 35 × 80 × 34.9

Angular contact ball · 3307 ATN9

at an angle — medium, on both sides
    Drawing of 3307 ATN9: ⌀35 × ⌀80 × 34.9 mm⌀80⌀3534.93307 ATN9
    Fig. 1: 3307 ATN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 3307 ATN9

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing SKF 3307 ATN9

    €58.47per piece incl. VAT
    In stock: 50 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 29 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    34.9 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    01

    Equivalents

    the same size 35 × 80 × 34.9 from other brands

    32 products
    Photo: 3307 ATN9
    You are viewingSKF 3307 ATN9
    €58.47baseline for the price comparison

    Everything the number specifies matches: series 33, 35 × 80 × 34.9 mm, open, no protection, special design; any contact angle. The codes in the number are read against the SKF catalogue.

    • Photo: 3307 ATN93307 ATN9This bearingSKF35 × 80 × 34.950 pcs€58.47you are here
    • Series illustration (not a photo of this item): 3307 A3307 ANTE35 × 80 × 34.9available to orderon request

    Under the price: the difference from the price of this bearing (€58.47).
    02

    Often bought with this

    seal 35×80, shaft snap ring Ø35, bore snap ring Ø80

    6 products
    • Seal 35×80JULU 035-80-10 TCWhy it fits: Oil seal 35×80: shaft 35 and housing bore 80, the same as the bearing
      €0.53250 pcs
    • Seal 35×80035-80-10Why it fits: Oil seal 35×80: shaft 35 and housing bore 80, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 80d 35B 34.9
    d×D×Bsize 35 × 80 × 34.9mm

    Angular contact ball bearing 3307 A.

    Frequently asked questions

    Will 3307 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet