+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
32308 · 40 × 90 × 35.25

Tapered roller · 32308

at an angle — high, on one side
    Drawing of 32308: ⌀40 × ⌀90 × 35.25 mm⌀90⌀40T 35.25C 27α32308
    Fig. 1: 32308, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 32308

    Combined load at an angle (tapered, high), axial on one sideTapered roller

    Bearing SKF 32308

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    7 exact, 1 approximate
    d
    40 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    90 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    T
    35.25 mm
    Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
    Cup width C
    27 mm
    Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
    C
    117 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 40 × 90 × 35.25 from other brands

    11 products
    Series illustration (not a photo of this item): 32308
    You are viewingSKF 32308

    Everything the number specifies matches: series 323, 40 × 90 mm, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 3230832308This bearingSKF40 × 90 × ?available to orderon requestyou are here
    • Series illustration (not a photo of this item): 3230832308CT40 × 90 × ?222 pcs€6.28
    • Series illustration (not a photo of this item): 3230832308NTE40 × 90 × ?190 pcs€7.37
    • Photo: 3230832308GPZ40 × 90 × 33available to order€10.45
    • Photo: 3230832308UTL40 × 90 × 33available to order€23.70
    • Series illustration (not a photo of this item): 3230832308no brand40 × 90 × ?available to orderon request
    • Series illustration (not a photo of this item): 3230832308KG40 × 90 × ?available to orderon request
    02

    Often bought with this

    seal 40×90, shaft snap ring Ø40, bore snap ring Ø90

    6 products
    • Seal 40×90JULU 040-90-10 TCWhy it fits: Oil seal 40×90: shaft 40 and housing bore 90, the same as the bearing
      €0.73400 pcs
    • Seal 40×90JULU 040-90-12 TCWhy it fits: Oil seal 40×90: shaft 40 and housing bore 90, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø40CT SEG 40 Z by 1000Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      €54.16available to order
    • Shaft snap ring Ø40SEG 40 Z (100 pcs)Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø90CT SEG 90 W by 100Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      €23.89available to order
    • Bore snap ring Ø90SEG 90 W by 1000Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    5 machines2 makesby parts catalogues

    1. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus same geometry 1 assembly · 4 pcs per machine

      the machine has B; ours does not

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus check the version 1 assembly · 2 pcs per machine

      not decoded: mark “A1” in the machine catalogue; GOST → ISO pair 7608→32308 only CX is not checked against a second source

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    3. Belarus 900/​920/​950/​952 (900.2/​900.3/​920.2/​920.3/​950.2/​950.3/​952.2/​952.3) Belarus check the version 1 assembly · 2 pcs per machine

      not decoded: mark “A1” in the machine catalogue; GOST → ISO pair 7608→32308 only CX is not checked against a second source

      manufacturer’s catalogue: BELARUS 900/​920/​950/​952. 900-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    4. Belarus-80Kh/​80Kh.1/​100Kh Belarus check the version 1 assembly · 2 pcs per machine

      not decoded: mark “A1” in the machine catalogue; GOST → ISO pair 7608→32308 only CX is not checked against a second source

      manufacturer’s catalogue: BELARUS-80Kh/​80Kh.1/​100Kh. 80Kh-0000010 KDS. Catalogue of assembly units and parts (RUE MTZ, 2012)

    5. KhTZ-2511, KhTZ-3510 KhTZ check the version 1 assembly · 1 pcs per machine

      not decoded: mark “K” in the machine catalogue; GOST → ISO pair 7608→32308 only CX is not checked against a second source

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Tsize 40 × 90 × 35.25mm
    Cdynamic 117kN

    Tapered roller bearing 32308.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet