+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
32214 J2/Q · 70 × 125 × 33.25

Tapered roller · 32214 J2/Q

at an angle — high, on one side
    Drawing of 32214 J2/Q: ⌀70 × ⌀125 × 33.25 mm⌀125⌀70B 31T 33.25C 27α32214 J2/Q
    Fig. 1: 32214 J2/Q, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 32214 J2/Q

    Combined load at an angle (tapered, high), axial on one sideTapered roller

    Bearing SKF 32214 J2/Q

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 1 approximate
    d
    70 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    125 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    31 mm
    Width BRing width. Source: supplier data
    T
    33.25 mm
    Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
    Cup width C
    27 mm
    Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
    C
    157 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 70 × 125 × 33.25 from other brands

    11 products
    Cross-section drawing to size: Tapered roller, 70 × 125 × T 33.25 mm
    You are viewingSKF 32214 J2/Q

    Same size, different design: the difference is written in the row.

    • Photo: 331074 Q331074 QQ: not decodedSKF70 × 125 × 31available to order€123.06
    02

    Often bought with this

    seal 70×125, shaft snap ring Ø70, bore snap ring Ø125

    3 products
    • Seal 70×125JULU 070-125-10 TCWhy it fits: Oil seal 70×125: shaft 70 and housing bore 125, the same as the bearing
      €0.8782 pcs
    • Shaft snap ring Ø70CT SEG 70 Z by1000Why it fits: DIN 471 snap ring for a 70 shaft: holds the inner ring on the shaft
      €209.55out of stock
    • Bore snap ring Ø125CT SEG 125 W by 100Why it fits: DIN 472 snap ring for a 125 bore: holds the outer ring in the housing
      €67.941 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    7 machines1 makeby parts catalogues

    1. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus check the version 1 assembly · 2 pcs per machine

      the machine has A; ours does not; not decoded: suffix of our number “J2 Q”; GOST → ISO pair 7514→32214 only CX is not checked against a second source

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus check the version 1 assembly · 2 pcs per machine

      the machine has A; ours does not; not decoded: suffix of our number “J2 Q”; GOST → ISO pair 7514→32214 only CX is not checked against a second source

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    3. Belarus 1523/​1523V/​1523.3 Belarus check the version 1 assembly · 2 pcs per machine

      the machine has A; ours does not; not decoded: suffix of our number “J2 Q”; GOST → ISO pair 7514→32214 only CX is not checked against a second source

      manufacturer’s catalogue: BELARUS 1523/​1523V/​1523.3. 1523-0000010 KDS. Catalogue of assembly units and parts, 2013 (RUE MTZ)

    4. Belarus 2022/​2022V (2022.3/​2022V.3) Belarus check the version 1 assembly · 2 pcs per machine

      the machine has A; ours does not; not decoded: suffix of our number “J2 Q”; GOST → ISO pair 7514→32214 only CX is not checked against a second source

      manufacturer’s catalogue: BELARUS 2022/​2022V. 2022-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    5. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus check the version 1 assembly · 2 pcs per machine

      the machine has A; ours does not; not decoded: suffix of our number “J2 Q”; GOST → ISO pair 7514→32214 only CX is not checked against a second source

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Tsize 70 × 125 × 33.25mm
    Cdynamic 157kN

    Tapered roller bearing 32214 J2/Q.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet