+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
3212 A/C3 · 60 × 110 × 36.5

Angular contact ball · 3212 A/C3

at an angle — medium, on both sides
    Drawing of 3212 A/C3: ⌀60 × ⌀110 × 36.5 mm⌀110⌀6036.53212 A/C3
    Fig. 1: 3212 A/C3, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 3212 A/C3

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing SKF 3212 A/C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 8 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    110 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    36.5 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    C3
    C
    73.5 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 60 × 110 × 36.5 from other brands

    9 products
    Series illustration (not a photo of this item): 3212 A/C3
    You are viewingSKF 3212 A/C3

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 3212 2RS TNG3212 2RS TNGcontact seals on both sides, normal clearance, TNGCT60 × 110 × 36.592 pcs€8.08
    • Series illustration (not a photo of this item): 3212 2RS3212 2RScontact seals on both sides, normal clearance, standard designCT60 × 110 × 36.53 pcs€11.29
    • Photo: 3212 A-2RS1TN9/MT 333212 A-2RS1TN9/MT 33contact seals on both sides, different cage, A, MT, 33: not decodedSKF60 × 110 × 36.51 pcs€101.74
    • Series illustration (not a photo of this item): 3212B-2RSRTNG3212B-2RSRTNGcontact seals on both sides, normal clearance, B, TNGNEUWEG60 × 110 × 36.5available to orderon request
    • Type diagram, no dimensions: ball3212B-2RSRTNG N AR3N5contact seals on both sides, 5, A, B, TNG, groove for a snap ring, R3: not decodedNSK60 × 110 × ?available to orderon request
    • Series illustration (not a photo of this item): 3212-2RSR3212-2RSRcontact seals on both sides, normal clearance, standard designNTE60 × 110 × 36.5available to orderon request
    • Series illustration (not a photo of this item): 3212 A-2RS1/MT333212 A-2RS1/MT33contact seals on both sides, normal clearance, A, MT33SKF60 × 110 × 36.5available to orderon request
    • Series illustration (not a photo of this item): 3212WA 53212WA 55, WA: not decodedNSK60 × 110 × ?available to orderon request
    02

    Often bought with this

    seal 60×110, shaft snap ring Ø60, bore snap ring Ø110

    4 products
    • Seal 60×110JULU 060-110-12 TCWhy it fits: Oil seal 60×110: shaft 60 and housing bore 110, the same as the bearing
      €1.05480 pcs
    • Seal 60×110JULU 060-110-10 TCWhy it fits: Oil seal 60×110: shaft 60 and housing bore 110, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø60CT SEG 60 Z by1000Why it fits: DIN 471 snap ring for a 60 shaft: holds the inner ring on the shaft
      €132.24out of stock
    • Bore snap ring Ø110CT SEG 110 W by 100Why it fits: DIN 472 snap ring for a 110 bore: holds the outer ring in the housing
      €51.47available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 110d 60B 36.5
    d×D×Bsize 60 × 110 × 36.5mm
    Cdynamic 73.5kN

    Angular contact ball bearing 3212 A C3.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet